SCI/ Scopus Journals

[1] Podder,D., Mandal, N.R. and Das, S. (2014). Heat source modeling and analysis of submerged arc welding. Welding Journal, American Welding Society, 93(5),pp.183-192.

[2] Podder,D., Kenno, S., Das, S. and Ranjan Mandal, N. (2015). Numerical investigation on interruption in the welding process used in shipbuilding.Journal of Ship Production and Design, 31(04), pp.220-229.

[3] Podder,D., Gadagi, A., Mandal, N.R. and Das, S. (2016). In sight of a fillet joint based on welding force method. Journal of Ship Production and Design,32(04), pp.206-215.

[4] Podder,D., Gadagi, A., Ranjan Mandal, N., Kumar, S., Singh, L. and Das, S. (2017).Numerical investigation on the effect of thermo-mechanical tensioning on the residual stresses in thin stiffened panels. Journal of Ship Production and Design, 33(01), pp.1-11.

[5] Gadagi, A., Mandal, N.R., Podder, D. and Kumar, S. (2018). Investigation on the effect of thermo-mechanical tensioning on weld induced out-of-plane distortions. Journal of Ship Production and Design, 34(02), pp.111-118.

[6] Gadagi, A.,  Mandal, N.R.,  Podder, D. (2019). Effect of Rate of Heat Input on Thermomechanical Tensioning for Distortion Mitigation.  Journal of Ship Production and Design, 35 (02), pp.103-114.

[7] Podder, D., Gupta, O.P., Das, S. and Mandal, N.R. (2019). Experimental and numerical investigation of effect of welding sequence on distortion of stiffened panels. Welding in the World, 63, pp.1275-1289.

[8] Podder,D., Das, S. and Mandal, N.R. (2019). Distortions in Large Stiffened Ship Panels Caused by Welding: An Experimental Study. Journal of Ship Production and Design, 35(03), pp.250-262

[9] Gupta, A., and Podder, D. (2021). Optimum position of outrigger belt system in a high rise RCC building through pushover analysis. Asian Journal of Civil Engineering, 22, pp.277-296. (Scopus).

[10] Gadagi, A.,  Mandal, N.R.,  Sha, O.P., Kumar, S., Pujari, S.,  Pentakota, R.K., Podder, D. and Akurati, P. (2021). Experimental Investigations on ThermoMechanical Tensioning (TMT), comparison with Heat Sink, and Its Application to a Grillage Structure’. , Journal of Ship Production and Design, 37(02), pp.109-116.

[11] Mahar, N., Podder. D. (2021). Damage detection in RC beam utilizing feed-forward back propagation neural network technique,’   Asian Journal of Civil Engineering, Springer, 22, pp. 1551-1561. (Scopus).

[12] Bora, A.,and Podder, D. (2024). Residual Stress Reduction Through Thermomechanical Tensioning for an Orthotropic Steel Bridge Deck. Journal of Materials Engineering and Performance, Springer, 33, pp. 4012 - 4028. 

[13] Bora, A.,and Podder, D. (2024). Multi-Response Optimization of an Orthotropic Steel Deck Section with Thermo-mechanical Tensioning. Steel Research International (Accepted) (https://doi.org/10.1002/srin.202400617)

[14] Thakre, A., M., Bora, A., and Podder, D. (2025). Influence of Residual Stresses on the Fatigue Behaviour of an Orthotropic Steel Deck using Fracture Mechanics Approach. International Journal of Steel Structures (Accepted).

non-SCI Journals

[1] Bhattacharya, P., Podder, D., and Sahu, A. (2014). Effects of Active Damping on Parametric Instability of Composite Cylindrical Shells using Piezo Fiber Composites. International Journal of Aerospace and Lightweight Structures. 24(03), pp. 445-471.

Conference Proceedings

[1] Sahu, A., Podder, D., and Bhattacharya, P. Static Deflection Control of Shallow Cylindrical Shell using PFC with IDE. National Conference on Recent Advances in Fluid & SolidMechanics at NIT Rourkela, February 27-28, 2010.

[2] Podder, D., and Bhattacharya, P. Parametric Excitation and Control of Laminated Composite Cylindrical Shell with IDE – PFC Actuator.  International Conference on Theoretical, Applied, Computational and Experimental Mechanics at IIT Kharagpur, December 27-29, 2010.

[3] Mandal, N. R., Kumar,  S., Podder, D., Gadagi, A. and Mathew, T., Bucklingmitigation of stiffened panels through thermo-mechanical tensioning. MARSTRUCT International Conference, Southampton, U.K., March 25-27, 2015. 

[4] Thermo-Mechanical Tensioning an Effective Buckling Mitigation Technique. Gadagi, A., Podder, D., Kumar, S., and Mandal, N.R. International Welding Symposium (IWS2K16), Bombay, September 5-7, 2016.

[5] Gupta, A., Mohan, R., and Podder, D., Parametric Study of Position of an Outrigger Belt System Through Pushover Analysis.International Conference on Emerging Research Trends in Structural Engineering(ERTSE-2020). VIT University, July 16-17, 2020.

[6] Mahar, N., and Podder, D., A Combined Soft Computing Mechanics Approach to Detect and Evaluate Damage in RCC Beam. 1st Online International Conference on Recent Advances in Computational and Experimental Mechanics. IIT Kharagpur, September 4-6, 2020.

Books

[1] Podder, D., Mandal, N. R. (Ed.), Das, S. (Ed.), (2016).Residual stresses, distortions and their mitigation for fusion welding,  Lambert Academic Publishing, (ISBN No.: 978-3-659-94213-6).

[2] Podder, D., and Chatterjee, S. (2022). Introduction to Structural Analysis, CRC PRESS. (ISBN/ISSN NO.: 978-0-367-53272-7).

§ Joined as a Trainee Civil Engineer (for one year) in Shapoorji Pallonji & Co. Ltd. in 2005 and thereafter promoted to Civil Engineer (S002).

§ Worked as a Visiting Research Student at the University of Windsor, Canada from 1st May 2013 to 30th April 2014.

§ Worked in a consultancy project at Cochin Shipyard Ltd., India (Work order No.: IQC/01/14). Project name: 'DISTORTION PREDICTION AND MEASUREMENT OF STIFFENED PANELS AND THEIR MITIGATION'.

§ Worked as an Ad-hoc faculty in the Civil Engineering department at NIT Jamshedpur from 4th January 2016 to 18th June 2016.

Ph.D. students (ongoing)

[1] Mr. Arindom Bora (P19CE001)

[2] Mr. Subham Ghosh (P24CE009)

M.Tech students (ongoing)

[1] Mr. Prateek Ghosh (T23CE006)

M.Tech students (guided)

[1] "Optimum position of an outrigger-belt system in a high-rise RCC building using Pushover analysis" - Mr. Aakash Gupta (T18CE010)

Outcome: Published one International journal and one International conference. 

[2] "Damage detection in RCC beam with ANNs" - Mr. Nikhil Mahar (T18CE011)

Outcome: Published one International journal and International conference.

[3] "Seismic Pounding simulation between three adjacent R.C.C. buildings - A parametric study" - Mr. Arjun Jasyal (T18CE006)

[4]  "Comparison of geometric irregular buildings in terms of irregularity index and seismic risk"- Mr. G. Vamsi Krishna (T19CE004) (Co-guided)

[5]  “Residual stress detection by Non-Destructive Ultrasonic test" - Mr. Sandip Basak (T19CE014) (Co-guided)

Outcome: One International journal communicated.

[6]  "Buckling analysis of CFRP composite large thin cylindrical shells using SPLA imperfection" - Mr. Tejaskria Pradhan (T19CE003)

[7] "Comparative study of soil-structure interaction on tall R.C.C. building and steel building subjected to Earthquake motion" - Mr. Abhinav Tiwari (T20CE010) (Co-guided)

[8] "A parametric study on effect of gradually varying welding speed on residual stress generation in structural steel"- Mr. Dinesh Kumar Panwa (T20CE018) 

[9] "Influence of the residual stresses on the fatigue behavior of the welded T-section"- Mr. Sumit Ashok Gupta (T20CE016) 

[10] "Comparative study considering residual/reactive stresses for different configurations of multi-pass welding for low-carbon steel"- Mr. George Henri (T20CE011) 

[11] "Influence of residual stress on the fatigue behavior of an orthotopic steel deck using fracture mechanics approach"- Mr. Aditya Manoj Thakare  (T21CE009) 

[12] "Comparative numerical study of fatigue life assessment in rib to deck welded joint considering various fatigue load models"- Mr. Ronak Kumar Jatav  (T21CE002) 

[13] "Parametric study of punching shear behavior of high-strength RC slab with multiple openings"- Mr. Sarad Aryal  (T21CE001) 

[14] "Numerical and analytical study on punching shear of circular opening flat slab"- Mr. Nabendu Biswas  (T21CE005) 

[15] "Structural Stress Analysis for Orthotropic Steel Deck Bridges" - Mr. Gopikrishna H. Bhat (T22CE003)

Warden of Lapalang-V Boys Hostel: Period- June 2020- June 2023

Photography and Fine Arts Club In-Charge: Period- July 2020- Till Date

Faculty Advisor (2018 Btech): Period- Dec. 2018 –Till Date

Faculty Advisor (2017 Btech): Period- August 2017 –Dec. 2018

Patron of Water conservation team: Period- September 2019- Till Date

Library In-charge (for CE Dept.): Period- July 2019- June 2020 

Laboratory In-charge (Solid Mechanics Lab.): Period- July 2019- June 2020 

Laboratory In-charge (Surveying Lab.): Period- July 2019- June 2020 

Laboratory In-charge (Transportation Eng. Lab.): Period- August 2018- August 2019 

Laboratory In-charge (Drawing Hall): Period- August 2018- August 2019  

Laboratory In-charge (Structural Analysis Lab.):  2021-2022

B.Tech Project Coordinator:  2021-2022 (B.Tech 2018 Batch)

• Structural Analysis-I (CE206)
• Structural Analysis-II (CE315)
• Engineering Drawing (CE101)
• Bridge Engineering  (CE322)
• Transportation Engineering -I (CE303)
• Transportation Engineering Lab-I (CE353)
  
• Matrix Method of Structural Analysis (CE503)
  
• Structural Engineering Lab-I (CE551)
  
• Finite Element Method (CE504/CE702)
  
• Design of Steel Structures (CE305)
  
• Computational Structural Lab (CE556)
  
• Concrete Technology (CE212)
  
• Computational Lab (CE521)
• Dynamics of Structure (CE555)
• Reinforced Concrete Design (CE312)
• Structural Analysis Lab-I (CE256)
• Estimation, Costing & Valuation (CE416)

1. Associate Member (ID: AM186488-5), The Institute of Engineers (India).

2. Associate Member (ID: 11855874), American Society of Civil Engineers.