dksarma@nitm.ac.in
9485177041
https://nitmeghalaya.irins.org/profile/101607
D.K. Sarma, S.Kr. Rajbongshi and M.A. Singh, Green Manufacturing: An Overview, 30th National Convention of Production Engineers on the Theme “Sustainable Manufacturing”, Period -., Place -Agartala, India, Page -40-1 to 40-6, 2015.
1. U.S. Dixit, D.K. Sarma and J. Paulo Davim. Environmentally Friendly Machining, Springer, London, ISBN: 978-1-4614-2307-210120127K, 2012, Total pages: 101.
2. Sanjib
Kr Rajbongshi, Deba Kumar Sarma, Process Parameters
Optimization Using Taguchi’s Orthogonal Array and
Grey Relational Analysis during Hard Turning of AISI D2 Steel in Forced Air-Cooled
Condition, IOP
Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/491/1/012032, Page nos. 1-6, 2019
3. K. Debnath, H. Dutta and D.K. Sarma, Green Manufacturing of Polymer Composites: A Futuristic Perspective, Woodhead Publishing India Pvt. Ltd., ISBN: 978-93-88320-08-5, Chapt. No. 9, page nos. 155-173, 2020.
4. H. Dutta, K. Debnath and D.K. Sarma, A Study of Wire Electrical Discharge Machining of Carbon Fibre Reinforced Plastic, Advances in Unconventional Machining and Composites, Springer Nature, ISBN: 10.1007/978-981-32-9471-4_36, Chapt 36, Page no. 451-460, 2020
5. Sanjib Kr Rajbongshi, Deba Kumar Sarma, Meinam Annebushan Singh, A brief review of white layer formation in hard machining with a case study, Lecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, doi.org/10.1007/978-981-15-0124-1_36, Springer, Page no. 407-418, 2020
6. Meinam Annebushan Singh, Deba Kumar Sarma, Sanjib Kr Rajbongshi, Ondrej Hanzel and Pavol Sajgalik, Investigation of Machining Capabilities of 2.5 vol.%MWCNT Al2O3 Composites in Micro-EDM, Lecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, doi.org/10.1007/978-981-15-0124-1_41, Springer, Page no. 459-465, 2020
7. Sanjib Kr Rajbongshi, Deba Kumar Sarma, Application of Taguchi’s Orthogonal Array and Overall Evaluation Criteria in Turning of AISI D2 Steel in Dry and Forced Air-Cooled Environment, Lecture Notes in Mechanical Engineering, Emerging Trends in Mechanical Engineering, doi.org/10.1007/978-981-32-9931-3_18, Page no. 177-186, 2020
8. K. Debnath, H. Dutta and D.K. Sarma, Influence of Different Tool Materials on the Machining Performance in ?ED-Milling of CFRP Composites, Machining and Machinability of Fibre Reinforced Polymer Composites, Composites Science and Technology, Springer-Nature Pte. Ltd., doi.org/10.1007/978-981-33-4153-1_8, Page no. 207-224, 2021
9. B.M. Barua, S. Chang, E. Shylla, V. S. Chauhan, P. Kumar, M. Rahang & D. K. Sarma, Numerical Modeling of Die-sinking EDM for Evaluation of Material Removal Rate and Surface Roughness, Recent Advances in Manufacturing Modelling and Optimization, Springer-Link, doi.org/10.1007/978-981-16-9952-8_7, Page no. 67-77, 2022
10. Souradeep DUTTA, Deba Kumar SARMA, Koushik DAS, & Bhargab Madhab BARUA, Numerical Modelling and Simulation of micro-EDM Process on Inconel 718 Using FEM Model, Advanced Production and Industrial Engineering, IOS Press Ebooks, doi:10.3233/ATDE220752, Page no. 268-273, https://doi.org/10.3233/ATDE220752, 2022
11. Hrishikesh Dutta, J. Jayaramudu, Kishore Debnath, Deba Kumar Sarma, Pubali Chetia, and S. Periyar Selvam, Introduction to Sustainable Manufacturing, Management and Industrial Engineering, Progress in Sustainable Manufacturing, Springer, doi.org/10.1007/978-981-99-0201-9, Page no. 1-10, 2023
12. Dutta, S. Sarma, D.K., Optimization of machining variables during nano powder mixed µ-EDM of NiTi Shape Memory Alloy. Processing and Fabrication of Advanced Materials, Volume 1 - Select Proceedings of PFAM 2023, Springer, Singapore (Accepted for publication), 2023.
Engineering Mechanics, Autumn Semester, 2013
Workshop Practice-I, Spring Semester, 2014
Strength of Material, Autumn Semester, 2014
Engineering Materials, Autumn Semester, 2014
Manufacturing Technology - I, Spring Semester, 2015
Manufacturing Technology - II, Autumn Semester, 2015
Manufacturing Science, Autumn Semester, 2015
Mechanical Laboratory III, Spring Semester, 2015
Manufacturing Technology - I, Spring Semester, 2016
Manufacturing Technology -II, Autumn Semester, 2016
Manufacturing Science, Autumn Semester, 2016
Engineering Materials, Spring Semester, 2017
Workshop Practice - II, Spring Semester, 2017
Strength of Material, Autumn Semester, 2017
Manufacturing Science, Autumn Semester, 2017
Engineering Materials, Spring Semester, 2018
Strength of Material, Autumn Semester, 2018
Engineering Materials and Thermal Science Lab, 2018
Engineering Materials, Spring Semester, 2019
Strength of Material, Autumn Semester, 2019
Manufacturing Science, Autumn Semester, 2019
Engineering Materials, Spring Semester, 2020
Strength of Material, Autumn Semester, 2020
Engineering Materials, Spring Semester, 2021
Advanced Manufacturing Lab, Spring Semester, 2021
Dr. M.A. Singh, Experimental and numerical analysis of multi-walled carbon nanotubes filled alumina composites in WEDM and micro-EDM process, Date of defense 05-01-2019.
Dr. S. Kr. Rajbongshi, MODELLING OF HARD & HIGH SPEED MACHINING ALONG WITH PARAMETRIC STUDY ON FLANK FACE SURFACE TEXTURING OF CUTTING TOOL, Date of defense 10-02-2020
Dr. Hrishikesh Dutta, ELECTRICAL-DISCHARGE MACHINING OF CARBON FIBER-REINFORCED POLYMER COMPOSITES, Date of defense 29-07-2021
PhD (Ongoing):
Arunabh Choudhury, Surface texturing on cutting tool to study machining performance, 2019-23
Souradeep Dutta, Study of micro-machining performance in superalloy, 2019-23
B.Tech Projects:
Denespoul Sohshang, Ardondor Jeengaph and Pavan Kumar Gugulothu,
Parametric Analysis of Machinability of Semiconducting Material, 2022-23
Kunal Kumar Ray, Adip Kumar Rabha, Himashri Lahary, Adarsh Singh, 3D Printing of a High-Tech Face Mask, 2021-22
Shubham Chang, Vivek Singh Chauhan, Eugynea Shylla and Prem Kumar, Thermal Analysis of Electric Discharge Machining of German Silver Material, 2020-21
Varish Agarwala and Nitesh Kumar, Re-Design and In-house Fabrication of Forensic tools, 2019-20
Saras Vibhuti, Mandela Rabha and Mashun Vashum, Design of artificial prosthetic hand / fingers with 3D printer, 2018-19
Karambeer Singh, Yellina Sriram Sai Teja and Agrasen Kumar, Develop an Expert System Using Artificial Neural Network in Machining AISI D2 Steel by Coated Carbide Tool, 2017-18Aiboklang Sawkmie, Shilpi Das and Jaydeep Joshi , Machining of Non-conducting Materials using Wire Electrical Discharge Machining and Numerical Modelling of Performance Parameters, 2016-17
Nikhil Tripathi and Lekhansh Hirwani , Hard Machining: Data Acquisition and Analysis, 2016-17
Student Extra Project:
Mentor: Dr. D.K. Sarma, Team Captain: Varish Agarwala, PRATHAM- Project Go-Cart. Sponsored by TEQIP-III, 2019-20
Head of Department (HoD), Department of Mechanical Engineering, from 05-09-2013 to 05-09-2016.
Invited Member, Senate, NITMeghalaya, from 2013 to 30-06-2020.
Center-in-Charge, Centralized Counseling for M.Tech./M.Arch./M.Plan Admissions (CCMT), For the year 2016.
Associate Dean (P&D), Planning & Development, NIT Meghalaya, from 16-08-2016 to 30-06-18.
Dean (P&D), Planning & Development, NIT Meghalaya, from 01-07-2018 to 30-06-2020.
Registrar (i/c), Administration, NIT Meghalaya, from 26-10-2016 to 18-05-2017.
Head of Center (HoC),Design Innovation Center, from 28-02-18 to till date.
Nodal Officer
(Procurement), TEQIP-III, Procurement of equipment, software, minor works etc., from 01-04-2017 to 30-09-2021.
Special Invited Member, Building & Works Committee (B&WC), from 30-06-2016 to 30-06-2018.
Member, Building & Works Committee (B&WC), from 01-07-2018 to 30-06-2020.
Coordinator, Research group, Manufacturing Engineering, ME Deptt. , from 23-06-2020 to till date
Chairman, Library Committee, from 01-07-2020 to 30-06-2023
Chairman, Core Committee for screening of applications for various NF posts of TA, TE and LA, 2020-21
Dean (P&D), Planning & Development, NIT Meghalaya, from 28-08-2023 to till date
Project
Sl No. |
Title of Project |
PI |
CO-PI |
Funding Agency |
Sanctioned Amount |
StartYr – EndYr (Duration) |
Status |
1 |
Feasibility Studies for Generating Electric Power Using Helical Water Turbine |
Dr. Vinayak Kulkarni, Dr. U.K. Saha (IITGuwahati) |
Dr. D.K. Sarma |
Assam Power Generation Corporation Limited (APGCL) |
27.2 lakhs |
2013-2017 |
Completed |
2 |
Technology Transfer of Betel Nut cutter and Briquette making machine |
Dr. D.K. Sarma |
nil |
Rural Technology Action Group (RuTAG-NE) |
Rs. 1.8 lakhs |
2015-16 |
Completed |
3 |
Design Innovation Center |
Dr. D.K. Sarma |
Dr. K. Das |
MHRD |
100 lakhs |
2016-19 |
Ongoing |
4 |
Design of a shallow water turbine for energy harvesting, utilizing stream water in hilly places |
Dr. D.K. Sarma, Dr. K. Das |
Mr. U. Kashyap, Mr. M.A. Singh |
DIC |
13.668 lakhs |
2018-19 |
Completed |
5 |
A low cost thermoelectric generator based energy generating probe that can be used with existing stoves in rural villages in North-East india |
Dr. D.K. Sarma |
Mr. U. Kashyap, Mr. B. Borah, Mr. M.A. Singh |
DIC |
1.1 lakh |
2018 |
Completed |
4 |
Design and Development of the Small Wind Turbine Combined with Solar system for Household Application |
Dr. B. K. Sarkar |
Dr. D. K. Sarma, Dr. S. Maity |
DIC |
3.2 lakhs |
2018-19 |
Completed |
5 |
Tool texturing in flank face of cutting tool using Laser, micro-machining and WEDM process for improvement of tool life and better surface finish of machined product |
Dr. D.k. Sarma |
nil |
TEQIP-III |
2.31 lakhs |
2019-21 |
Ongoing |
Consultancy
Sl No. |
Title of Project |
PI |
CO-PI |
Funding Agency |
Sanctioned Amount |
StartYr – EndYr (Duration) |
Status |
1 |
Concrete Mix Design for construction of NIT Meghalaya, permanent campus at Sohra (First phase) |
Dr. D.K. Sarma and Dr. C. Marthong |
nil |
RITES, Gurgoan |
1,10,000 |
2014 |
Completed |
2 |
Concrete Mix Design for construction of NIT Meghalaya, permanent campus at Sohra (Second phase) |
Dr. D.K. Sarma and Dr. C. Marthong |
nil |
RITES, Gurgoan |
1,00,000 |
2015 |
Completed |
3 |
Third party quality Control/Assurance in various project of CPWD, Shillong (First Phase) |
Dr. D.K. Sarma and Dr. C. Marthong |
nil |
CPWD, Shillong |
2,26,452.00 |
2015 |
Completed |
4 |
Third party quality Control/Assurance in various project of CPWD, Shillong (Second Phase) |
Dr. D.K. Sarma and Dr. C. Marthong |
nil |
CPWD, Shillong |
1% of project cost |
2016 |
Ongoing |
5 |
Testing of angle section and barbed wire for providing overhanging wire fencing at Shillong Airport |
Dr. D.K. Sarma and Dr. C. Marthong |
nil |
Airport Authority of India, Shillong |
25,000 |
2015 |
Completed |
6 |
Material testing |
Dr. D.K. Sarma and Dr. C. Marthong |
nil |
CPWD, Shillong |
174000 |
2016 |
Completed |
7 |
Material Testing |
Dr. D.K. Sarma |
nil |
State Investment Programme Management & Implementation Unit, Govt. of Meghalaya |
15870 |
2017 |
Completed |
8 |
Material Testing |
Dr. D.K. Sarma |
nil |
State Investment Programme Management & Implementation Unit, Govt. of Meghalaya |
24980 |
2017 |
Completed |
9 |
Testing of anodic coating of aluminium section |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
11,800 |
2017 |
Completed |
10 |
Testing of materials |
Dr. D.K. Sarma |
nil |
RITES Ltd., Shillong |
26,550 |
2017 |
Completed |
11 |
Testing of materials |
Dr. D.K. Sarma |
nil |
PWD(B), Meghalaya |
56,640 |
2017 |
Completed |
12 |
Testing of materials |
Dr. D.K. Sarma |
nil |
St. Terasa Int. School, Shillong |
37,800 |
2017 |
Completed |
13 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
1,13,280 |
2018 |
Completed |
14 |
Testing of anodic coating of aluminium section |
Dr. D.K. Sarma |
nil |
RITES Ltd., Shillong |
23,600 |
2018 |
Completed |
15 |
Testing of materials |
Dr. D.K. Sarma |
nil |
RITES Ltd.,, Shillong |
55,460 |
2018 |
Completed |
16 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
35,400 |
2018 |
Completed |
17 |
Testing of materials |
Dr. D.K. Sarma |
nil |
Mr. C. Swakmie, Shillong |
36,580 |
2018 |
Completed |
18 |
Third part inspection of JCB |
Dr. D.K. Sarma |
nil |
State Investment Programme Management & Implementation Unit, Govt. of Meghalaya |
87,000 |
2018 |
Completed |
19 |
Material Testing |
Dr. D.K. Sarma |
nil |
State Investment Programme Management & Implementation Unit, Govt. of Meghalaya |
47,790 |
2018 |
Completed |
20 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
37,760 |
2018 |
Completed |
21 |
Testing of materials |
Dr. D.K. Sarma |
nil |
MPWD, Shillong |
56,640 |
2019 |
Completed |
22 |
Testing of materials |
Dr. D.K. Sarma |
nil |
B.D. Marbeniang, Shillong |
47,790 |
2019 |
Completed |
23 |
Testing of materials |
Dr. D.K. Sarma |
nil |
MPWD, Shillong |
51,920 |
2019 |
Completed |
24 |
Testing of materials |
Dr. D.K. Sarma |
nil |
MPWD, Shillong |
63,720 |
2019 |
Completed |
25 |
Testing of materials |
Dr. D.K. Sarma |
nil |
B.D. Marbeniang, Shillong |
8,850 |
2019 |
Completed |
26 |
Testing of materials |
Dr. D.K. Sarma |
nil |
NITM boundary wall, Shillong |
47,200 |
2019 |
Completed |
27 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
89,680 |
2019 |
Completed |
28 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
49,560 |
2019 |
Completed |
29 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
77,880 |
2019 |
Completed |
30 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
54,280 |
2019 |
Completed |
31 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
28,320 |
2019 |
Completed |
32 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
49,560 |
2019 |
Completed |
33 |
Testing of materials |
Dr. D.K. Sarma |
nil |
M/s Rishen Rapsang, Shillong |
77,880 |
2019 |
Completed |
34 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
14,160 |
2019 |
Completed |
35 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
23,600 |
2019 |
Completed |
36 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
77,880 |
2020 |
Completed |
37 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
35,400 |
2020 |
Completed |
38 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
28,320 |
2020 |
Completed |
39 |
Testing of materials |
Dr. D.K. Sarma |
nil |
CPWD, Shillong |
2,73,760 |
2020 |
Completed |
Conference
Sl No. |
Title |
Sponsors |
National/International |
Duration |
Role Played |
1 |
5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) at IITGuwahati, (NITMeghalaya was an Associate Institute) |
DST, ONGC, BRNS |
International |
12-12-2014 to 14-12-2014. |
Organising member |
2 |
International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME) |
DST, NEC, NEEPCO, TEQIP-III, TOCIC-IITG, NIT Arunachal Pradesh |
International |
08-11-2018 to 10-11-2018 |
Organizing Secretary |
Workshop
Sl No. |
Title |
Sponsors |
National/International |
Duration |
Role Played |
1 |
Identification of the need based technological issues related to rural economy for providing S&T interventions for such systems and technologies that have already been developed to a level of functioning and are identified for further development to |
RuTAG-NE |
National |
25-02-2014 |
Coordinator |
2 |
Computational Modeling and Analysis using Ansys and Creo (CoMAAC) |
Allied – PTC Creo & Innovent Engineering Solutions – ANSYS |
National |
3-06-15 to 7-06-15 |
President |
3 |
Identification of challenging, need-based problems related to science & technology concerning rural economy |
RuTAG-NE |
National |
18-03-2016 |
Coordinator |
4 |
One Day Workshop on Promoting Innovation in Individuals, Start-Ups and MSMEs (PRISM) Scheme |
TePP Outreach cum Cluster Innovation Centre (TOCIC) IIT GUWAHATI & Department of Science and Industrial Research (DSIR) |
National |
04-05-2017 |
Convener |
5 |
Short Term Course On Seismic Resistant Design, Assessment and Retrofitting of RC Buildings |
Department of Civil Engineering, National Institute of Technology Meghalaya |
National |
27-05-19 to 31-05-19 |
Adviser |
6 |
One day workshop on “Innovation & Entrepreneurship” under PRISM (Promoting Innovations in Individuals, Start-ups and MSMEs)
|
DSIR-TOCIC at IIT-Guwahati |
National |
07-06-2019 |
Convener |
7 |
Industry Academia Conclave |
NECTAR, Maverick Technologies, Jindal steel, TEQIP-III |
National |
12-12-2019 to 13-12-2019 |
Member, advisory Committee |
8 |
Research Conclave, NIT Meghalaya |
NIT Meghalaya |
National |
28-02-2020 |
Member, advisory Committee |
9 |
Short Term Course on Green Technologies for Sustainable Growth |
NIT Meghalaya |
National |
14-09-2020 to 18-09-2020 |
Finance Secretary |
10 |
National Education Policy 2020 with a focus on “Higher Education and Research” |
TEQIP-III |
National |
17-02-2021 |
Organizing Committee member |
Seminar
Sl No. |
Title |
Sponsors |
National/International |
Duration |
Role Played |
1 |
Interactive session for the faculty members and research scholars of NIT Meghalaya with the experts of Design Innovation Center, IIT Guwahati |
DIC, NIT Meghalaya |
National |
08-05-2017 |
Coordinator |
2 |
Interactive session for the Research Scholars and Faculty members towards regarding the possibilities of funding under innovation scheme. Speaker: Dr. Ramanuj Banerjee, Scientist-E, DSIR, GoI. |
Deptt. of ME, NITMeghalaya |
National |
10-01-2018 |
Convener |
Workshop
Sl No. |
Name |
Period |
Place |
National/International |
1 |
Workshop on Engineering Curriculum and Instructional Design |
05-06-2014 to 07-06-2014 |
NIT Meghalaya, Shillong |
National |
2 |
IPR & Ethical Issues in Engineering-Becoming Innovators |
23-06-2014 to 25-06-2014 |
Effective Quality Up-gradation Assistance for Technical Education (EQUATE), New Delhi |
National |
3 |
Industrial tour, equipment inspection and training |
10-08-2014 to 16-08-2014 |
M/s GUNT, Hamburg, Germany |
International |
4 |
Knowledge Incubation Cell (KIC) – TEQIP sponsored short term course on “Advanced Machining and Finishing Processes” |
15-12-2014 to 16-12-2014 |
Department of Mechanical Engineering, IITGuwahati |
National |
5 |
Workshop on “Internet of Things: A Gateway to Smart and Intelligent Future” |
04-11-2016 to 05-11-2016 |
NIT Meghalaya |
National |
6 |
Summer Training Program on Active Learning for Senior Faculty |
02-07-2018 to 06-07-2018 |
IIT Indore |
National |
7 |
Workshop on Good Governance |
29-01-2019 |
Gauhati University, Conducted by SPIU-NE, TEQIP-III |
National |
8 |
Executive Leadership Program |
19-07-2019 to 21-07-2019 |
Vyakti Vikas Kendra, The Art of Living, Bangalore |
National |
9 |
Short Term Course on Analytical Mechanics and its Applications |
14-12-2020 to 18-12-2020 |
Department of Mechanical Engineering, IITGuwahati |
National |
10 |
National Education Policy 2020 with a focus on “Higher Education and Research” |
17-02-2021 |
NIT Meghalaya, conducted by TEQIP-III |
National |
Conference
Sl No. |
Name |
Period |
Place |
National|International |
1 |
National Conference on Manufacturing: Vision for Future |
12-10-2013 to 13-10-2013 |
Deptt. Of Mechanical Engineering, IITGuwahati |
National |
2 |
5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) |
12-12-2014 to 14-12-2014 |
Department of Mechanical Engineering, IITGuwahati |
International |
3 |
17th International Conference on Mechanics, Materials and Civil Engineering (ICMMCE 2015) |
20-07-2015 to 21-07-2015 |
World Academy of Science Engineering & Technology (WASET), Paris, France |
International |
4 |
18th International Conference on Mechanical, Materials and Manufacturing Engineering (ICMMME 2016) |
18-1-2016 to 19-1-2016 |
World Academy of Science Engineering & Technology (WASET), London, UK |
International |
5 |
2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017) |
14-09-2017 to 16-09-2017 |
Swinburne University, Melbourne, Australlia |
International |
6 |
International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018) |
08-11-2018 to 10-11-2018 |
Shillong, NIT Meghalaya |
International |
7 |
4th International Conference on Mechanical and Aeronautical Engineering (ICMAE 2018) |
13-12-2018 to 16-12-2018 |
Bangkok, Thailand |
International |
8 |
2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019) |
20-11-2019 to 22-11-2019 |
BITS PILANI, Dubai Campus, Dubai, UAE |
International |
|
|
|
|
|
Sl No. | Committee Name | Contribution | Description | Duration |
---|---|---|---|---|
1 | Convocation Preparation Committee | Core committee member | 2014,2015, 2016, 2017, 2018 | |
2 | Departmental Advisory Committee (DAC) | Chairman | 05-09-2013 to 05-09-2016 | |
3 | Departmental Research Committee (DRC) | Chairman | 05-09-2013 to 05-09-2016 | |
4 | Academic Probation Committee, ME Deptt. | Chairman | 05-09-2013 to 05-09-2016 | |
5 | Planning and Preparation Committee for Shifting to the Permanent campus | Chairman | 2015-16, 20116-17 | |
6 | Physical Stock Verification Committee | Convener | 2015-16 | |
7 | NITM Alumni Association | Convener | 2015-16 | |
8 | Framing of Modalities to start Part-time M.Tech programme in NIT Meghalaya | Convener | Framing of rules | 2016 |
9 | CPDA Rules Framing Committee | Member | 2014 | |
10 | Revised Detailed Project Report (DPR), NIT Meghalaya | Convenor | 29-5-17 to till date | |
11 | Academic Programme Committee (APC) | Member | 2014 to 2016 | |
12 | Evaluation of BTech Project Seminar | Convenor | Spring semester-2017 | |
13 | Research Committee (RC) | Member | 2016, 2017, 2018 | |
14 | Pay revision of Institute Teaching and Non-teaching Staff as per 7th CPC | Chairman | Fixation of pay and calculation of arrears | November'17-'January'18 |
15 | Verification of institute account in regards of Grant in Aid received from MHRD | Member | Verification of funds received, audited anual accounts and utilization certifiates along with unspent balance | Feb'18 to March'18 |
Sl. no. |
Activities |
1 |
Board of Studies for Mechanical Engineering, NITMizoram, External Member, from 2014-2015, (National) |
2 |
Audit committee for MPURB (Meghalaya Private University Regulatory Board), External Member, from 2014-2015, (National) |
3 |
Procurement Committee, ME Deptt., NIT Nagaland, Member, from 2017-2018, (National) |
4 |
Member, Selection board, Temporary faculty, ME Deptt., NIT Nagaland, Member, from 02-02-2018 |
5 |
Member, External committee for investigation of procedure lapse by Dean-in-charge (Acad), NIT Arunachal, 15-11-18. |
6 |
Member, Short listing committee for faculty recruitment, NIT Arunachal, 8-1-19 to 9-1-2019 |
7 |
Chairman, Project Review Committee (PEC), DSIR, GOI, at IITGuwahtai, 22-04-2019 |
8 |
Member, Project Review Committee (PEC), DSIR, GOI, at IITGuwahtai, 17-06-2019 |
9 |
External Examiner, MTech thesis evaluation, NIT Arunachal Pradesh, 9-5-19 to 11-5-19 |
10 |
Member, Audit observation Committee, NIT Arunachal Pradesh, 10-08-19 |
11 |
Member, Selection board, Guest Faculty, ME Deptt., NIT Nagaland, Member, 13-08-2019 |
Sl No. | Name | Member ID | Category | Validity |
---|---|---|---|---|
1 | Indian Welding Society (IWS) | L01167 | Life member | Life long |
Sl No. |
Award and Invited Talks |
Date & Year |
1 |
Best Teacher Award, NITMeghalaya |
01-04-2015 |
2 |
Invited to NIT Arunachal Pradesh to deliver Expert lecture on NBA accreditation |
16-09-2019 |
3 |
Invited to Asansol Institute of Engineering and Management – Polytechnic, Asansol, WB to deliver Expert talk at FDP on “Environment-Friendly Machining” |
28-12-2020 |