Civil Engineering

Head of Department

Dr. Pradeep Kumar Gautam
Ph.D(NIT Jaipur )

E-mail:
hod.civil@nitm.ac.in

Faculty

Back

Dr. Comingstarful Marthong Professor

PhD, IIT Guwahati, Assam

commarthong@nitm.ac.in commarthong@gmail.com
9485177027
https://nitmeghalaya.irins.org/profile/101562

Research Interest

Retrofitting and Rehabilitation of RC structures, Earthquake Resistant Design of Structures, Seismic vulnerability study of Structures, Masonry structures.

Education Qualification

PhD, IIT Guwahati, Assam

Educational qualification:

Degree

Institute

Subject/Specialization

Doctoral (PhD)

IIT Guwahati, Assam

Structural Engineering

Master (M.Tech)

IIT (BHU) Varanasi

Structural Engineering

Graduate (B.Tech)

NERIST, A.P

Civil Engineering

Class XII (Eqv.)

NERIST, A. P

Science & Civil Engineering

Class X

J.N.V Nahan, H.P

10th CBSE subject

Publications

1.   Teiborlang Warjri, Richard Badonbok Lyngkhoi, Comingstarful Marthong (2025). “Behavior of AAC masonry walls strengthened with NSM steel welded wire mesh and barbed wire under compression loads”, Structures ,78 (2025) 109329, https://doi.org/10.1016/j.istruc.2025.109329.

2.   Teiborlang Warjri, Richard Badonbok Lyngkhoi, Gregoria Kyntunamlang Langstang, Comingstarful Marthong (2025). “Review of current application schemes in reinforcing masonry walls with modern materials”, Structural Monitoring and Maintenance, Accepted.

3.   Richard Badonbok Lyngkhoi, Teiborlang Warjri, Comingstarful Marthong (2025).Out-of-plane flexural behaviour of AAC masonry walls reinforced using steel wire mesh integrated within the masonry bed and bed-head joint” Structures, 76, 108897, https://doi.org/10.1016/j.istruc.2025.108897

4.   Donkupar Francis Marbaniang, Pujitha Ganapathi Chottemada, Dibyendu Adak, Arkamitra Kar, Salim Barbhuiya & Comingstarful Marthong (2025). “Enhancing mechanical strength and microstructural properties of alkali-activated systems through nano graphene oxide dispersion and polycarboxylate ether admixture”, Construction and Building Materials, 453, 139004, https://doi.org/10.1016/j.conbuildmat.2024.139004.

5.   Salim Barbhuiya, Dibyendu Adak, Comingstarful Marthong & John Fort (2025). “Sustainable solutions for low-cost building: Material innovations for Assam-type house in North-East India”, Case Studies in Construction Materials, 22, e04461, https://doi.org/10.1016/j.cscm.2025.e04461.

6.   Gregoria K. Langstang, Teiborlang Warjri, Richard B. Lyngkhoi, and Comingstarful Marthong (2024). “An Experimental study of AAC masonry prisms with chases under Compression”. Advances in Material Research, Techno press, 13(5), 375-389. https://doi.org/10.12989/amr.2024.13.5.375.

7.   Richard Badonbok Lyngkhoi, Teiborlang Warjri, Comingstarful Marthong (2024). “Shear behaviour of AAC masonry reinforced by incorporating steel wire mesh within the masonry bed and bed-head joint”, Earthquake and Structures, Techno press, 26(5), 363-382, https://doi.org/10.12989/eas.2024.26.5.363.

8.   Teiborlang Warjri, Richard Badonbok Lyngkhoi, Comingstarful Marthong (2024). “Impact of moisture content on the compressive and shear behavior of an autoclaved aerated concrete masonry” Journal of Materials in Civil Engineering, ASCE, 36(6), 04024127-1 to 13, ASCE, ISSN 0899-1561.

9.   Richard Badonbok Lyngkhoi, Teiborlang Warjri, Comingstarful Marthong (2023). “Shear performance of AAC masonry triplets strengthened by reinforcing steel wire mesh in the bed and bed-head joint”, Earthquake and Structures, Techno press, 25 (3), 149-160. https://doi.org/10.12989/eas.2023.25.3.149.

10.            Wanraplang Warlarpih and Comingstarful Marthong (2023). “Shear behaviour of AAC masonry walls with and without openings strengthened with welded wire mesh”, Structural Engineering and Mechanics, Techno Press, 87 (5), 487-498, https://doi.org/10.12989/sem.2023.87.5.487.

11.            Richard Badonbok Lyngkhoi, Teiborlang Warjri, Wanraplang Warlarpih and Comingstarful Marthong (2023). “Effectiveness of steel wire mesh as a strengthening material for masonry walls: A review”, Structural Monitoring and Maintenance, Techno Press, 10(2), 117-132, https://doi.org/10.12989/smm.2023.10.2.117.

12.            Richard Badonbok Lyngkhoi, Teiborlang Warjri, Comingstarful Marthong (2023). “Experimental investigation of AAC masonry walls reinforced with steel wire mesh embedded in bed and bed-head joint under axial compressive loading”, Construction and Building Materials, Elsevier, 392,132035, https://doi.org/10.1016/j.conbuildmat.2023.132035.

13.            Richard Badonbok Lyngkhoi, Teiborlang Warjri, Samuel Bennett, Comingstarful Marthong (2023). “Effect of moisture content on the mechanical behaviour of AAC masonry systems”, Materials Today: Proceedings, Elsevier, 1-7, https://doi.org/10.1016/j.matpr.2023.03.778.

14.            Richard Badonbok Lyngkhoi, Teiborlang Warjri, Comingstarful Marthong (2023). “Use of steel wire mesh for compressive strength enhancement of AAC masonry wall”, Materials Today: Proceedings, Elsevier, 1-8, https://doi.org/10.1016/j.matpr.2023.02.423.

15.            Teiborlang Warjri, Donkupar Francis Marbaniang and Comingstarful Marthong (2022). “In-plane behaviour of masonry walls embedding with steel welded wire mesh overlay with mortar”, Journal of Structural Integrity and Maintenance, Taylor and Francis, 7(3), 177-187, https://doi.org/10.1080/24705314.2022.2048241.

16.            Donkupar Francis, Teiborlang Warjri, and Comingstarful Marthong (2022). “Out-of-plane bending of masonry wall embedding with welded wire mesh (WWM) in different orientations”, Innovative Infrastructure Solution, Springer, 7(91), 1-15, https://doi.org/10.1007/s41062-021-00676-w.

17.             Hopeful Syiemiong, Comingstarful Marthong (2021). “Compressive strength behviour of low-strength hollow concrete block masonry prisms”, Structural Engineering and Mechanics, Techno Press, 80(6), 689-699. DOI: https://doi.org/10.12989/sem.2021.80.6.689.

18.             Comingstarful Marthong, Jonathan Vanlalruata (2021). "Behaviour of repaired RC beam-column joints using welded wire mesh and jacketed with polymer modified mortar", Earthquake and StructureTechno Press21(1), 85-99,  https://doi.org/10.12989/eas.2021.21.1.085.

19.             Hopeful Syiemiong, Comingstarful Marthong (2021). “A review on improved construction methods for clay-brick and concrete-block ordinary masonry buildings”, Journal of Structural Integrity and Maintenance, Taylor and Francis, 6(2), 67-83. https://doi.org/10.1080/24705314.2020.1862963.

20.             Hopeful Syiemiong, Comingstarful Marthong (2021). “The effect of mortar grade on the out-of-plane behaviour of low-strength masonry wall strengthened with welded wire mesh”, Construction and Building Materials, 279,1-17, https://doi.org/10.1016/j.conbuildmat.2021.122393.

21.             Jonathan Vanlalruata, Comingstarful Marthong (2021). “Effect of cold joint on the flexural strength of RC beam”, Journal of Structural Integrity and Maintenance, Taylor and Francis, 6 (1), 28-36, https://doi.org/10.1080/24705314.2020.1823556.

22.            Jonathan Vanlalruata, Comingstarful Marthong (2021). “Behaviour of RC beam-column joint with varying location of construction joints in the column”, Earthquake and Structure, Techno Press, 21(1), 29-38, https://doi.org/10.12989/eas.2021.20.1.29.

23.             Hopeful Syiemiong, Comingstarful Marthong (2020). “Flexural behavior of low strength masonry wallettes strengthened with welded wire mesh”, Material Today: Proceedings,  https://doi.org/10.1016/j.matpr.2020.10.452.

24.            Comingstarful Marthong (2020). “Compressive behavior of galvanized steel wire mesh (GSWM) strengthened RC short column of varying shapes”, Structural monitoring and maintenance-An Intl. 7(3), 5-231,  https://doi.org/10.12989/smm.2020.7.3.215.

25.            Hopeful Syiemiong, Comingstarful Marthong (2020). “Effect of mortar grade on the uniaxial compression strength of low-strength hollow concrete block masonry prisms" Material Today: Proceedings, 28(2), 842-845, https://doi.org/10.1016/j.matpr.2019.12.309.

26.            Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and FRP wrapping”, Structural Engineering and Mechanics, Techno Press. 72(6), 723-736. http://dx.doi.org/10.12989/sem.2019.72.6.723.

27.            Comingstarful Marthong (2019). "Behavior of repaired RAC beam-column joints using steel welded wire mesh jacketed with cement mortar” Advance Concrete Construction, Techno Press, 8(2), 91-100. http://dx.doi.org/10.12989/acc.2019.8.2.091.

28.            Hopeful Syiemiong, Comingstarful Marthong (2019)"Effect of moisture on the compressive strength of low-strength hollow concrete blocks"Computer and ConcreteTechno Press. 23(4), 267-272. http://dx.doi.org/10.12989/cac.2019.23.4.267.

29.            Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh”, Earthquake and Structures, Techno Press16 (3),  253-263. http://dx.doi.org/10.12989/eas.2019.16.3.253.

30.            Comingstarful Marthong (2019). “Effect of waste cement bag fibers on the mechanical strength of concrete”, Advances in Materials Research, 8 (2), 103-115 DOI: https://doi.org/10.12989/amr.2019.8.2.103.

31.            Comingstarful Marthong, Risukka N. Pyrbota, Stevenly L. Trona, Lam-I D. Mawroha, Md. Sakil A. Choudhurya and Ganesh S. Bhartia (2018). “Micro-concrete composites for strengthening of RC frame made of recycled aggregate concrete”, Computers and Concrete, Techno Press, 22 (5), 461-468. http://dx.doi.org/10.12989/cac.2018.22.5.461.

32.            Comingstarful Marthong (2018).  Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region, Computers and Concrete, Techno Press, 2018, 21(6), 669-679. http://dx.doi.org/10.12989/cac.2018.21.6.669.

33.            Kevinguto Khate, M. Longshithung Patton, Comingstarful Marthong (2018).  Structural behaviour of stainless-steel stub column under axial compression: a FE study,” International Journal of Steel Structures, 18(5), 1723-1740. https://doi.org/10.1007/s13296-018-0083-1.

34.            C. Marthong, S.K. Deb and A. Dutta Deb (2018). Effect of loading rates on the behavior of epoxy repaired RC beam-column connections, European Journal of Environmental and Civil Engineering, 22(10), 1212-1237. https://doi.org/10.1080/19648189.2016.1248790.

35.            Kevinguto Khate, M. Longshithung Patton, Comingstarful Marthong (2018). Numerical modeling of lean duplex stainless steel stub column built-up sections under pure axial compression, Journal of Advance Research in Dynamical & Control Systems, 10(4), 948-959.

36.            C. Marthong, A. S. Sangma, Md. S. A.Choudhury, R. N. Pyrbot, S. L. Tron ,L. Mawroh, G. S. Bharti (2017).  Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region, Structures, Elsevier, 11,  243-251. https://doi.org/10.1016/j.istruc.2017.07.001.

37.            C. Marthong and D.K.Sarma (2016).  Influence of PET fiber geometry on the mechanical properties of concrete: An experimental investigation, European Journal of Environmental and Civil Engineering, 20(7), 771-784. https://doi.org/10.1080/19648189.2015.1072112.

38.            C. Marthong, A. Dutta and S.K Deb (2016).  Study on size effect of RC and Rehabilitated exterior beam-column connections under cyclic loading, European Journal of Environmental and Civil Engineering, 20(5), 586-610. https://doi.org/10.1080/19648189.2015.1056385.

39.            C. Marthong and S Marthong (2016). An experimental study on the effect of PET fibers on the behavior of exterior RC beam-column connection subjected to reversed cyclic loading, Structures, 5,  175-185. https://doi.org/10.1016/j.istruc.2015.11.003.

40.            C. Marthong and D.K.Sarma (2016). Flexural behavior of Ferrocement plates incorporating steel and PET fibers, Key Engineering Materials (Materials and Construction Technologies for Sustainable Development), 665,  97-106.

41.            C. Marthong, A. Dutta and S.K Deb (2016).  Effect of Cyclic Loading Frequency on the Behaviour of exterior RC Beam-Column Connections, Journal of Earthquake Engineering, 20(7),  1126-1147. https://doi.org/10.1080/13632469.2016.1138164.

42.            C. Marthong, S.K. Deb and A. Dutta Deb (2016). Experimental Fragility Functions for Exterior RC Beam-Column Connections before and after Rehabilitation, Earthquake and Structure, 10(6), 1291-1314. http://dx.doi.org/10.12989/eas.2016.10.6.1291.

43.            C. Marthong (2015).  Effects of PET fiber arrangement and dimensions on mechanical properties of concrete, The IES Journal Part A: Civil & Structural Engineering, 8(2),  111- 120. ttps://doi.org/10.1080/19373260.2015.1014304.

44.            Comingstarful Marthong and Deba Kumar Sarma (2015).  Mechanical behavior of recycled PET fiber reinforced concrete matrix,” World Academy of Science and Technology, Int. journal of Civil and Environmental Engineering, 9(7), 879-883. ISBN 0000000091950263.

45.            C. Marthong and S Marthong (2015). Enhancing mechanical properties of concrete prepared with coarse recycled aggregates, The IES Journal Part A: Civil & Structural Engineering, 8(3), 175 – 183. https://doi.org/10.1080/19373260.2015.1041203.

46.            C. Marthong, A. Dutta and S.K Deb (2013). Seismic rehabilitation of RC exterior beam-column connections using epoxy resin injection, Journal of Earthquake Engineering, 17(3), 378-398. https://doi.org/10.1080/13632469.2012.738284

 

Courses Taught

  • Engineering Drawing, Spring Semester ( 2012): Civil Engineering Materials, Autumn Semester (2014): Structural Analysis-I, Autumn Semester (2015): Structural Analysis-II, Spring Semester (2015): Reinforce Concrete Design, Autumn Semester (2015): Structural Analysis-II, Spring Semester (2016): Bridge Engineering, Spring Semester (2016): Reinforce Concrete Design, Autumn Semester (2017): Structural Analysis-II, Spring Semester (2017): Pre-Stressed Concrete, Autumn Semester (2018): Structural Dynamics, Spring (2018): Structural Analysis-II, Spring Semester (2018): Pre-Stressed Concrete, Autumn Semester (2019): Structural Analysis-II, Spring Semester (2020): Reinforce Concrete Design, Autumn Semester (2021): Concrete Technology, Spring Semester (2022): Design of Steel structures, Autumn (2023): Concrete Technology, Autumn Semester (2024). 

Administrative Responsibility

Position

Period

Responsibility

Hostel Warden

Jan. 2013 – Jan. 2015

Looking after the affair of hostel

Faculty i/c Engineering Section

Aug. 2013 – June 2016

Function and decision related to Engineering activities of NIT Meghalaya.

HOD, CE Dept.

Aug.  2013 - Aug. 2015

Establishment of the Dept., Curriculum development, Lab set up etc and overall i/c of the Dept.

June 2016 - June 2018

Curriculum development, Lab set up etc and overall i/c of the Dept.

Dean Planning & Development

July 2020 - May 2023

Overall infrastructures development and maintenance of the Institute

Dean Student welfare

June 2023 Aug. 2023

Overall welfare of the students

Chief Vigilance Officer (CVO)

22nd Sept. 2023 till date

Vigilance of the Institute activities

Projects

1.    Research project

 Sl. No.

Title of Project

Sponsoring Agency

Amount (lakhs)

Period

 

Role

 

1

Rehabilitation of RC beam-column connections by epoxy resin injection and FRP sheets wrapping.

SERB-DST, GOI, New

Delhi

20.88

2014-2017

PI

2

Seismic Vulnerability Assessment of School Buildings of East

Khasi Hills District of Meghalaya and Method of Reducing it.

State Disaster Management

Authority (SDMA),

Shillong

9.12

2015-2017

PI

3

Biodegradation of pulp and paper mill waste using different composting techniques

SERB-DST, GOI, New

Delhi

32.93

2015-2017

Co-PI

4

Feasibility study on use of locally available material (Low grade Aggregates) for road construction (BRO project Pushpak in Mizoram)

Border Road Organization (BRO), Shillong

4.95

2017-2018

PI

5

Low-cost precast concrete panels for assam type housing in north-east india

Scheme for promotion of academic and research collaboration a (SPARC), government of india initiative

72.58

2023-2025

Co-PI

 

2. Consultancy (Amount >10.0 lakhs)

 

Sl.no

Nature of works

Organization

Amount (Lacs)

Role

1/224

Vetting of DPR "Greater Sohra water supply" scheme

PHE, Govt. of Meghalaya

18.75

PI

2/225

Vetting of DPR "Laying of new feeder mains under Tura Phase- I&II water supply scheme

PHE, Govt. of Meghalaya

26.24

PI

3/291

Technical and economic appraisal of DPR for project recommended by DONER under NESIDS (Laying of feeder mains under TURA Phase I & II water supply scheme)

PHED, Govt. of Meghalaya

56.20

PI

4/316

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

16.70

PI

5/338

Vetting of DPR

PWD(Roads), Govt. of Meghalaya

44.25

PI

6/341

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

19.07

PI

7/343

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

14.40

PI

8/348

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

12.38

PI

9/356

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

25.02

PI

10/362

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

21.24

PI

11/368

Vetting of DPR

PHED, Govt. of Meghalaya

74.99

PI

12/369

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

14.58

PI

13/370

Vetting of DPR

Directorate of Tourism, Govt. of Meghalaya

12.94

PI

14/375

Vetting of DPR for Urban Affair, Shillong

Directorate of Urban Affairs, Shillong

111.16

PI

15/377

Vetting of design/drawings for bridge of Wahkaji-Nongstoin, West Khasi Hills

Superintending Engineer PWD (Roads), Western Circle, Nongstoin, Govt. of Meghalaya

27.72

PI

16/378

Consultancy services (Structural assessment) on the Iawmusiang market for Jaintia Hills District Autonomous District Council (JHADC) Jowai, funded by Ministry of DONER, GOI

Chief Engineer, PWD (B), Shillong

11.80

PI

17/382

Vetting of DPR for “Redevelopment of Nohkalikai Falls (View point) Meghalaya”, Directorate of Tourism, Govt. of Meghalaya

Directorate of Tourism, Govt. of Meghalaya

10.19

PI

18/389

Vetting of Architectural and Structural drawings of buildings items (Trep) of the proposed MLCU permanent campus at Umphyrnai, Martin Luther Christian University, Meghalaya (Ref. No: III/7/(2)/LD&C Umphyrnai/923/2021-8481 Dated: June 23,2023)

Martin Luther Christian University, Shillong

16.36

PI

19/391

Vetting of DPR “Development of Hotel Block at Nongmahir New site, Ri Bhoi District” Meghalaya, Directorate of Tourism Dept. (Ref. No.: M/D Tour 83/2022/34 dated 19th July 2023)

Directorate of Tourism, Govt. of Meghalaya

14.16

PI

20/392

Vetting of DPR for "Development of Mawrah Village" Meghalaya, Directorate of Tourism Dept. (M/D-Tour/MAL/203/2022/4 Dated 20th July 2023

Directorate of Tourism, Govt. of Meghalaya

25.21

PI

21/409

Vetting of DPR’s for construction of synthetic Athletic tracks

State Sports Council, Meghalaya

20.62

PI

22/413

Vetting of DPR for Creation of Hospitality complex at Wao Wari-pelga Falls, West garo hills

Directorate of Tourism, Govt. of Meghalaya

11.67

PI

23/416

Structural design of Judicial Court, Shillong

PWD (Buildings), Shillong

25.12

PI

24/420

Vetting of Boundary wall of NECTAR project, Shillong

NECTAR, Shillong

10.96

PI

 

 

 

 

Students Supervised/Supervising

  • Thesis tittle

    Name of students

    Status

    Experimental and numerical study on seismic performance of masonry wall made of hollow concrete block

    Mr. Hopeful Syiemiong

     

    Completed

    Numerical Modelling of Lean Duplex Stainless-Steel Built-up columns

    Mr. Kevinguto Khate

    Thesis submitted

    Experimental study on the behaviour of AAC masonry walls reinforced by embedding steel wire mesh into the masonry bed and bed-head joint

    Mr. Richard Badonbok Lyngkhoi

     

    Thesis submitted

    Experimental study on the behaviour of AAC masonry walls strengthened using near surface mounted welded wire mesh and barbed wire

    Mr. Teiborlang Warjri

     

    Continuing

    Behaviour of masonry walls with chases

    Ms. Amerioca Thangkhiew

    Continuing

    Behaviours of masonry walls with openings

    Mr. Samkupar Mawlong

    Continuing

Conference/Symposium/Workshop/Seminar Organised

Sl. No.

Title

Sponsors

National/

International

Duration

Role

1

Skill Development in Masons

SDMA, Government of Meghalaya

National

120 Hrs

Coordinator

2

Identification of challenging need base problem related to rural economy

Ru-TAG NE

National

1 Day

Co-Coordinator

3

Structural detailing of RCC and steel structures

Self

National

5 days

(14-18.01.2018

Coordinator

4

Seismic resistant design, assessment and retrofitting of RC buildings

Self

National

5 days

(22-26.07.2019)

Coordinator

5

Structural safety audit

District disaster management authority (DDMA), government of Meghalaya, Shillong

National

5 days

(16-20.11.2020)

Coordinator

6

Hands on training on Auto CAD

Power grid corporation of India limited, Shillong

National

3 days

(3-5.11.2020)

Coordinator

7

Rapid visual screening of buildings

District disaster management authority (DDMA), government of Meghalaya, Shillong

National

3 days

(7-9.12.2020)

Coordinator

8

Bitumen and road construction

Indian oil corporation limited (IOCL), Guwahati divisional office

National

1 day

(30.03.2021)

Coordinator

9

Soft measures for flood and erosion control in Meghalaya

Government of IIndia ministry of Jal shakti Dept. of water resources, RD and GR Brahmaputra board regional office for Meghalaya, Shillong

National

1 day

(05.06.2022)

Coordinator

Confernce/Workshop/Seminar Attended

Conference:

Sl No.NamePeriodPlaceNational|International
118th Int. Conference on Civil, Structural and Geo-environmental Engineering, (ICCSGE 2016)18th -19th January 2016.London, United Kingdom,International
2Int. Conf. of Mechanics, Materials and Civil Engineering, (ICMMCE 2015)20th -21st July 2015Paris, FranceInternational
3Int. Conference on Advances in Civil Engineering and Chemistry of Innovative Materials (ACECIM'14)13th - 14th March 2014SRM, ChennaiInternational
4Int. conference on sustainable innovative technique in Civil and Environmental Engineering5th-6th June 2013JNU, New DelhiInternational
5International Conference on Earthquake Resistant Construction Practices (ICEQRCP 2012)July 27-28 2012ChennaiInternational
6Proceedings of 36th Conference on Our World in Concrete and StructuresAugust 14-16SingaporeInternational
7National Conference on Recent Advances in Civil EngineeringOctober 14-16 2011IT BHU, VaranasiNational
82nd International Conference on Design, Mechanical and Material Engineering14th-16th Sept. 2017Swinburne University of Technology, MelbourneInternational

Professional Membership

Sl No.NameMember IDCategoryValidity
1Institution of Engineers IndiaNo. M-1476399MemberLife

Awards

Sl.no.

Award details

Year

1

Ranked top position in school for the 41st Annual All India G.K contest –Awarded by United Schools Organization of India (USO)

1992

2

Ranked top position in school for the National Mathematics Olympiad contest 1992- Awarded by Delhi Association of Mathematics Teachers, Delhi

1992

3

Representing University (BHU) in the inter university East Zone football held at Kolkata in the year 2001-2002- Awarded by Banaras Hindu University (BHU).

2002

4

Best paper awarded during the “Int. Conference on Advances in Civil Engineering and Chemistry of Innovative Materials (ACECIM'14), Civil Engg. Department, held on 13th – 14th March 2014 on the topic “Rehabilitation and Strengthening of damaged RC beam-column Connections - A State-of-the-Art Review”

2014

5

Executing highest consultancy project in FY 2018-2019–Awarded by NIT Meghalaya

2018

6

Executing highest consultancy project in FY 2019-2020–Awarded by NIT Meghalaya

2019

7

Executing highest consultancy project in FY 2020-2021–Awarded by NIT Meghalaya

2020

8

Executing highest consultancy project in FY 2021-2022–Awarded by NIT Meghalaya

2021

9

Best paper warded during the “Second international conference on construction materials and structures (ICCMS'22),” held on 13th – 19th Dec. 2022 at NIT Calicut on the topic “Use of steel wire mesh for compressive strength enhancement of AAC masonry wall- Authored by Richard Badonbok Lyngkhoi, Teiborlang Warjri, Comingstarful Marthong

2022

10

Executing highest consultancy project in FY 2022-2023–Awarded by NIT Meghalaya

2022

Invited Talks

Sl No.TitleEventInvited Talks/TutorialCo-Speakers
1Seismic rehabilitations of concrete strucutesState-of-the-art lecture for 29th National Convention of Civil EngineersInvited talkNil
2Sensitization programme for contractors on safe construction practicesWorkshop conducted by the DC office, ShillongInvited talkNil
3New Technology for Earthquake Safety Construction and Design, Refresher in Disaster ManagementDept. of Adult and Continuing Education, NEHUInvited talkNil
4Safety Audit-Rapid Visual Screening (RVS) proceduresBriefing of RVS procedure, DC Office ShillongInvited talkNil