International Journals:

1.     Dutta, S., Sarma, D.K. and Dutta, H., Investigation of Performance characteristics amid nano powder mixed Electrical Discharge micro-milling on Hastelloy C 276, Journal of Machining Science and Technology, (Accepted), 2023.
2.     Arunabh Choudhury, Deba Kumar Sarma, Sanjib Kumar Rajbongshi; Neural Network Modelling for Predicting Surface Finish and Flank Wear on AISI D2 steel Machining, Academic Journal of Manufacturing Engineering, Vol. 21, Page nos. 41-53, 2023.
3.       Dutta, S. and Sarma, D.K.,  Application of graphene nano powder in the dielectric oil to optimize the machining variables during µ-EDM of Hastelloy C 276 based on Taguchi Method, Materials Today: Proceedings, Elsevier, https://doi.org/10.1016/j.matpr.2023.04.521, (Accepted), 2023.
4.      M. A. Singh, D. K. Sarma, O. Hanzel, P. Šajgalík, Janakarajan Ramkumar, Characterization of surface topography during multi-pass WEDM of MWCNT alumina composites, CIRP Journal of Manufacturing Science and Technology, Elsevier, doi.org/10.1016/j.cirpj.2022.11.019, Vol. 41, Page nos. 338-349, 2023.
5.       Dutta, S. and Sarma, D.K.  Multi-objective optimization of µ-EDM parameters for µ-hole drilling on Hastelloy C 276 Super alloy using Response Surface Methodology and Multi-objective Genetic Algorithm. CIRP Journal of Manufacturing Science and Technology, DOI: doi.org/10.1016/j.cirpj.2022.07.011, Vol., No.39, Page nos. 115-133, 2022
6.      Dutta, S. and Sarma, D.K.  Multi-response optimization of machining parameters to minimise the Overcut and Circularity error during Micro-EDM of Nickel-Titanium Shape Memory Alloy. Advances in Materials and Processing Technologies (Taylor & Francis), DOI: 10.1080/2374068X.2022.2090787, 2022.
7.       H.Dutta, K. Debnath, and D.K. Sarma, Preliminary Investigation of Powder-Mixed Microelectrical Discharge Drilling (PMµEDD) of CFRP Composite, Surface Review and Letters (SRL), World Scientific, DOI: 10.1142/S0218625X22501116, Vol. 29, No.8, Page nos. 2250111-11, 2022
8.       H. Dutta, K. Debnath, and D.K. Sarma, Experimental investigation of parametric effects and characterization of the machined surface in µED-milling of CFRP composite, Arabian Journal for Science and Engineering, (Springer), doi.org/10.1007/s13369-022-06869-4, 2022.
9.      Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma, Investigation on Cutting of thin carbon fiber reinforced polymer composite plate using sandwich electrode-assisted wire electrical discharge machining, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, (SAGE), DOI: 10.1177/09544089211013318, Vol., No., Page nos. 1-11, 2021
10.      Meinam Annebushan Singh, Koushik Das, Deba Kumar Sarma, Development and experimental validation of numerical formulations of a heuristic model in WEDM of H13 tool steel, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.23, No.4, Page nos. 348-368, 2021
11. Dutta H, Debnath K, Sarma D. K, Improving the Micro-Electrical-Discharge Drilling Performance of Carbon Fiber-Reinforced Polymer: Role of Electrode and Shaped Tools, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.23, No.2, Page nos. 191-207, 2021
12. Sanjib Kr. Rajbongshi, Deba Kumar Sarma, Surface morphology and effect of cutting force and temperature in formation of the white layer during hard machining, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.23, No.2, Page nos. 113-135, 2021
13. H. Dutta, K. Debnath, D. K. Sarma (2020) Multi-objective Optimization of Hole Dilation at Inlet and Outlet during Machining of CFRP by µEDM Using Assisting-Electrode and Rotating Tool, International Journal of Advanced Manufacturing Technology,  Vol. 110, No.(9-10), Page nos. 2305-2322, 2020
14. H. Dutta, K. Debnath, D.K. Sarma, Improving the Performance of µED-Milling using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites, Materials Today: Proceedings, Elsevier, Vol. 28, Page nos. 755-760, 2020
15. D. K. Sarma, S. Kr. Rajbongshi, A study in turning of AISI D2 steel with Textured and Non-textured coated carbide tool at the flank face, Materials Today: Proceedings, Elsevier, Vol. 28, Page nos. 574-581, 2020
16. D. K. Sarma, Meinam Annebushan Singh, Machining of thin sections using multi-pass Wire Electrical Discharge Machining process, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.22, No.1, Page Nos. 62-78, 2020
    
17. Sanjib Kr. Rajbongshi, Deba Kumar Sarma, Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face, International Journal of Refractory Metals and Hard Materials, Vol.83, Page Nos-1-16, September 2019,
    
18. Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma, A Study of Material Removal and Surface Characteristics in Micro-Electrical Discharge Machining of Carbon Fibre Reinforced Plastics, Polymer Composite, Willey, Vol.40, No.10, Page nos. 4033-4041, 2019
19. M. A. Singh, Sanjib Kr. Rajbongshi, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface and porous recast layer analysis in µ-EDM of MWCNT-Al2O3 composites, Materials and Manufacturing Processes, Taylor & Francis, Vol.34, No.5, Page Nos.567-579, 2019
20. Sanjib Kr. Rajbongshi, Meinam annebushan Singh, Deba Kumar Sarma, A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face, Journal of Manufacturing Processes, Elsevier, Vol.-36, Page Nos- 360-372, 2018
21. Sanjib Kr. Rajbongshi, Deba Kumar Sarma, A comparative study in prediction of surface roughness & flank wear using artificial neural network & response surface methodology method during hard turning in dry and forced air-cooling condition, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol. 21, Nos. 5/6, Page Nos.- 390-436, , 2019
22. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface Characteristics and Erosion Phenomena in WEDM of Alumina Composites, Materials and Manufacturing Processes, Taylor & Francis, Vol.-33, Issue No.16, Page Nos- 1815-1821, 2018
23. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Wire Electrical Discharge Machining of MWCNT filled alumina composites, Materials Today Proceedings, Elsevier, Vol.-37(9), Page Nos -3107-3114, 2018
24. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface Characteristics Enhancement of MWCNT alumina composites in Multi Pass WEDM process, Journal of the European Ceramic Society, Elsevier, Vol.-38(11), Page Nos -4035-4042, 2018 
25. M. A. Singh, K. Das, D. K. Sarma, Thermal Simulation of Machining of Alumina with Wire Electrical Discharge Machining Process using Assisting Electrode, Journal of Mechanical Science and Technology, Springer, Vol.-32(1), Page Nos -333-343, 2018
26. M.A. Singh, D.K. Sarma, Parametric and Subsurface Analysis of MWCNT Alumina Composites in WEDM Process, Ceramics International, Elsevier, Vol.-44(2), Page Nos -2186-2197, 2018 
27. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlá?ek, P. Šajgalík, Machinability analysis of multi walled carbon nanotubes filled alumina composites in Wire Electrical Discharge Machining process, Journal of the European Ceramic Society, Elsevier, Vol.-37(9), Page Nos -3107-3114, 2017 
28. C. Marthong, D.K. Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation, European Journal of Environment and Civil Engineering, Taylor and Francis, Vol.-20, Issue No.-7, Page Nos -771-784, 2016 
29. C. Marthong, D.K. Sarma, Flexural behavior of ferrocement plates incorporating steel and PET fibers, Materials and Construction Technologies for Sustainable Development, Key Engineering Materials, Trans Tech Publication, Vol.-666, Page Nos -97-106, 2016
30. R. Kalidasan, M.Yatin, D.K.Sarma, S.Senthilvelan, U.S. Dixit, An experimental study of cutting forces and temperature in multi-tool turning in grey cast iron, International Journal of Machining and Machinability of Materials, Inderscience, Vol.-18, Issue No.-5/6, Page Nos -540-541, 2016
31. Comingstarful Marthong, Deba Kumar Sarma, Mechanical Behavior of Recycled Pet Fiber Reinforced Concrete Matrix, International Journal of Civil and Environmental Engineering, WASET, Vol. 9, No.7, Page Nos- 879-883, 2015
32. R. Kalidasan, M.Yatin, D.K.Sarma, S.Senthilvelan, Effect of Offset Distance on Cutting Forces and Heat Generation in Multi-Tool Turning Process, Applied Mechanics and Materials, Trans Tech, Vol.-592-594, Page Nos -211-215, 2014
33. R. Kalidasan, V. Ramanuj, D.K.Sarma, S.Senthilvelan, Influence of cutting speed and offset distance over cutting tool vibration in multi-tool turning process, Advanced Materials Research, Trans Tech Publication, Vol.-984-985, Page Nos -100-105, 2014
    
34. D.K. Sarma, U.S. Dixit, Neural network modelling of forces and indirect prediction of tool wear in turning of grey cast iron, International Journal of Machining and Machinability of Materials, Inderscience, Vol.-8, Page Nos -55-75, 2010 
35. D.K. Sarma, U.S. Dixit, Environment-friendly strategies for efficient utilization of cutting tools in finish turning, Journal of Manufacturing Science and Engineering, Transactions of ASME, Vol.-131, Page Nos -064506 pp. 1-5, 2009 
36. D.K.Sarma, U.S.Dixit, A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool, Journal of Material Processing Technology, Elsevier, Vol.-190, Page Nos -160-172, 2007 
37. U.S.Dixit, P.S.Robi, D.K.Sarma, A systematic procedure for the design of a cold rolling mill, Journal of Materials Processing Technology, Elsevier, Vol.-121, Page Nos -69-76, 2002 

International Conferences:

1. Souradeep Dutta and Deba Kumar Sarma, Application of graphene nano powder in the dielectric oil to optimize the machining variables during ?-EDM of Hastelloy C 276 based on Taguchi Method, 16TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM 2022), Period 05-12-22 to 07-12-22, Auckland University of Technology (AUT), Auckland, New Zealand, Pages-6, 2022
2. Dutta, S. Sarma, D.K. Das, K. Barua, B.M. Numerical modelling and simulation of ?-EDM process on Inconel 718 using FEM model. 7th International Conference on Advanced Production and Industrial Engineering (ICAPIE 2022), Period 11-06-2022 to 12-06-2022, Centre for Advanced Production and Industrial Research, Delhi Technological University (DTU), Delhi. Page-6, 2022.
3. Souradeep Dutta and Deba Kumar Sarma, Multi-response optimization of machining parameters to minimize the Overcut and Circularity error during Micro-EDM of Nickel-Titanium Shape Memory Alloy, 2nd International Conference on Industrial and Manufacturing System (CIMS2021), Period 11-11-2021 to 13-11-2021, PEC, Chandigarh and NIT Jalandhar, Page-6, 2021
4. H. Dutta, K. Debnath, D.K. Sarma, Improving the Performance of µED-Milling using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019), Period 20-11-2019 to 22-11-2019, BITS PILANI, Dubai Campus, UAE, Page -6, 2019
5. D. K. Sarma, S. Kr. Rajbongshi, A study in turning of AISI D2 steel with Textured and Non-textured coated carbide tool at the flank face, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019), Period 20-11-2019 to 22-11-2019, BITS PILANI, Dubai Campus, UAE, Page -6, 2019
6. Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma, Performance Analysis of µEDM of Carbon Fiber Reinforced Polymers using Copper and Brass Tools, 20th CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, Zurich, Switzerland, Page-6, 2019
7. S. Kr. Rajbongshi, D. K. Sarma, Process parameters optimization using Taguchi’s orthogonal array and grey relational analysis during hard turning of AISI D2 steel in forced air-cooled condition, 4th International Conference on Mechanical and Aeronautical Engineering (ICMAE 2018), Hong Kong Society of Mechanical Engineers, Period 13-12-2018 to 16-12-2018, Bangkok, Thailand, Page -6, 2018
8. S. Kr. Rajbongshi, D. K. Sarma, Application of Taguchi’s orthogonal array and overall evaluation criteria in turning of AISI D2 steel in dry and forced air-cooled environment, 1^st International Conference on Emerging Trends in Mechanical Engineering (ICETME-2018), department of Mechanical Engineering, Srinivasa Ramanujan Institute of Technology, Anantapur, Andhra Pradesh, India, Period 20-12-2018 to 22-12-2018, Proceedings published in Springer Nature Singapore Pte Ltd., Page -177-185, 2020
9. Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma, A Study of Wire Electrical Discharge Machining of Carbon Fibre Reinforced Plastic, 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Period 13-12-2018 – 15-12- 2018, Department of Mechanical Engineering and Department of Production Technology of Anna University, Chennai, Page- 451-460, 2018.
10. Sanjib Kr. Rajbongshi, D. K. Sarma, M. A. Singh, A brief review of white layer formation in hard machining with a case study, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Period 08-11-18 to 10-11-18, 2018, NIT Meghalaya, Shillong, India, Page -6, 2018.
11. M. A. Singh, D. K. Sarma, Sanjib Kr. Rajbongshi, O. Hanzel, P. Šajgalík, Investigation of machining capabilities of 2.5 vol. % MWCNT Al₂O₃ composites in µ-EDM, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Period 08-11-18 to 10-11-18, 2018, NIT Meghalaya, Shillong, India, Page -6, 2018.
12. M.A. Singh, D.K. Sarma, H.M. Kalita, C. Marthong, Analysis of material removal and surface characteristics in machining multi walled carbon nanotubes filled alumina composites by WEDM process, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.
13. C. Marthong, D.K.Sarma, H.M. Kalita, Effect of aspect ratio and volume fraction of PET fibre on the mechanical properties of PFRC, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.
14. H.M. Kalita, A.K. Sarma, C. Marthong, D.K.Sarma, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.
15. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Wire electrical discharge machining of MWCNT filled alumina composites, 7^th International Conference on Materials Processing and Characterstics (ICMPC 2017), Hyderabad, India, 2017.
16. D.K. Sarma and S.Kr. Rajbongshi, Experimental Study and Neural Network Modeling in Prediction of Surface Roughness on Dry Turning Using Two Different Cutting Tool Nose Radii, 18th International Conference on Mechanical, Materials and Manufacturing Engineering (ICMMME 2016), Period -., Place -Wembly, Middlesex, London, Page -989-994, 2016.
17. C. Marthong and D.K. Sarma, Mechanical behaviour of recycled PET fiber Reinforced concrete matrix, 17th International Conference on Mechanics, materials and Civil Engineering (ICMMCE – 2015), Period -., Place -Paris, France, Page -1294-1298, 2015.
18. M.A. Singh, K. Das and D.K. Sarma, Numerical Simulation of Wire Electrical Discharge Machining of Non-conducting Material, 24th International Symposium on Processing and Fabrication of Advanced Material (PFAM-24), Period -., Place -Kansai University, Osaka, Japan, Page -484-493, 2015.
19. R. Kalidasan, V. Ramanuj, D.K. Sarma and S. Senthilvelan, Influence of cutting speed and offset distance over cutting tool vibration in multi-tool turning process, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-14), Period -., Place -Ponjesley College of Engineering, Nagercoil-3, Tamilnadu, Page -330-333, 2014.
20. R. Kalidasan, M. Yatin, S. Senthilvelan and D.K. Sarma, Preliminary Experimental Investigation on Multi-tool Turning Process, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR-14), Period -., Place -Department of Mechanical Engineering, IITGuwahati, Page -50-1 to 50-5, 2014.
21. U. Gautom, S. Das and D.K. Sarma, Prediction of Surface Roughness on Dry Turning using Two Different Cutting Tool Nose Radius, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR-14), Period -., Place -Department of Mechanical Engineering, IITGuwahati, Page -577-1 to 577-6, 2014.
22. M. Yatin, R. Vishwakarma, D.K. Sarma and S. Senthilvelan, Design of attachment tool for multi-tool turning, Twenty-First International Symposium on Processing and Fabrication of Advanced Materials-XXI. (PFAM-21), Period -., Place -Department of Mechanical Engineering, IITGuwahati, Page -854-866, 2012.
    
23. D.K. Sarma, N. Abburi and U.S. Dixit, A study of performance of ceramic, carbide and high speed steel tools in turning of gray cast iron, International Conference on Recent Advances in Material Processing Technology, (RAMPT ’05), Period -., Place -Department of Mechanical Engineering., National Engineering College, K.R. Nagar, Kovilpatti, Tamilnadu, Page -85-93, 2005.

National Conferences:

D.K. Sarma, S.Kr. Rajbongshi and M.A. Singh, Green Manufacturing: An Overview, 30th National Convention of Production Engineers on the Theme “Sustainable Manufacturing”, Period -., Place -Agartala, India, Page -40-1 to 40-6, 2015.

Books & Book Chapters:

1. U.S. Dixit, D.K. Sarma and J. Paulo Davim. Environmentally Friendly Machining, Springer, London, ISBN: 978-1-4614-2307-210120127K, 2012, Total pages: 101.

2. Sanjib Kr Rajbongshi, Deba Kumar Sarma, Process Parameters Optimization Using Taguchi’s Orthogonal Array and Grey Relational Analysis during Hard Turning of AISI D2 Steel in Forced Air-Cooled Condition, IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/491/1/012032, Page nos. 1-6, 2019

3. K. Debnath, H. Dutta and D.K. Sarma, Green Manufacturing of Polymer Composites: A Futuristic Perspective, Woodhead Publishing India Pvt. Ltd., ISBN: 978-93-88320-08-5, Chapt. No. 9, page nos. 155-173, 2020.

4. H. Dutta, K. Debnath and D.K. Sarma, A Study of Wire Electrical Discharge Machining of Carbon Fibre Reinforced Plastic, Advances in Unconventional Machining and Composites, Springer Nature, ISBN: 10.1007/978-981-32-9471-4_36, Chapt 36, Page no.  451-460, 2020

5. Sanjib Kr Rajbongshi, Deba Kumar Sarma, Meinam Annebushan Singh, A brief review of white layer formation in hard machining with a case study, Lecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, doi.org/10.1007/978-981-15-0124-1_36, Springer, Page no.  407-418, 2020

6. Meinam Annebushan Singh, Deba Kumar Sarma, Sanjib Kr Rajbongshi, Ondrej Hanzel and Pavol Sajgalik, Investigation of Machining Capabilities of 2.5 vol.%MWCNT Al2O3 Composites in Micro-EDM, Lecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, doi.org/10.1007/978-981-15-0124-1_41, Springer, Page no.  459-465, 2020

7. Sanjib Kr Rajbongshi, Deba Kumar Sarma, Application of Taguchi’s Orthogonal Array and Overall Evaluation Criteria in Turning of AISI D2 Steel in Dry and Forced Air-Cooled Environment, Lecture Notes in Mechanical Engineering, Emerging Trends in Mechanical Engineering, doi.org/10.1007/978-981-32-9931-3_18, Page no.  177-186, 2020

8. K. Debnath,  H. Dutta and D.K. Sarma, Influence of Different Tool Materials on the Machining Performance in ?ED-Milling of CFRP Composites, Machining and Machinability of Fibre Reinforced Polymer Composites, Composites Science and Technology, Springer-Nature Pte. Ltd.,  doi.org/10.1007/978-981-33-4153-1_8, Page no.  207-224, 2021

9. B.M. Barua, S. Chang, E. Shylla, V. S. Chauhan, P. Kumar, M. Rahang & D. K. Sarma, Numerical Modeling of Die-sinking EDM for Evaluation of Material Removal Rate and Surface Roughness, Recent Advances in Manufacturing Modelling and Optimization, Springer-Link, doi.org/10.1007/978-981-16-9952-8_7, Page no.  67-77, 2022

10. Souradeep DUTTA, Dr. Deba Kumar SARMA, Dr. Koushik DAS, & Bhargab Madhab BARUA, Numerical Modelling and Simulation of ?-EDM Process on Inconel 718 Using FEM Model, Advanced Production and Industrial Engineering, IOS Press Ebooks, doi:10.3233/ATDE220752, Page no.  268-273, 2022

11. Hrishikesh Dutta, J. Jayaramudu, Kishore Debnath, Deba Kumar Sarma, Pubali Chetia, and S. Periyar Selvam, Introduction to Sustainable Manufacturing, Management and Industrial Engineering, Progress in Sustainable Manufacturing, Springer, doi.org/10.1007/978-981-99-0201-9, Page no.  1-10, 2023

Engineering Mechanics, Autumn Semester, 2013

Workshop Practice-I, Spring Semester, 2014

Strength of Material, Autumn Semester, 2014

Engineering Materials, Autumn Semester, 2014

Manufacturing Technology - I, Spring Semester, 2015

Manufacturing Technology - II, Autumn Semester, 2015

Manufacturing Science, Autumn Semester, 2015

Mechanical Laboratory III, Spring Semester, 2015

Manufacturing Technology - I, Spring Semester, 2016

Manufacturing Technology -II, Autumn Semester, 2016

Manufacturing Science, Autumn Semester, 2016

Engineering Materials, Spring Semester, 2017

Workshop Practice - II, Spring Semester, 2017

Strength of Material, Autumn Semester, 2017

Manufacturing Science, Autumn Semester, 2017

Engineering Materials, Spring Semester, 2018

Strength of Material, Autumn Semester, 2018

Engineering Materials and Thermal Science Lab, 2018

Engineering Materials, Spring Semester, 2019

Strength of Material, Autumn Semester, 2019

Manufacturing Science, Autumn Semester, 2019

Engineering Materials, Spring Semester, 2020

Strength of Material, Autumn Semester, 2020

Engineering Materials, Spring Semester, 2021

Advanced Manufacturing Lab, Spring Semester, 2021

• Ph.D (Completed):
  

Dr. M.A. Singh, Experimental and numerical analysis of multi-walled carbon nanotubes filled alumina composites in WEDM and micro-EDM process, Date of defense 05-01-2019.

Dr. S. Kr. Rajbongshi, MODELLING OF HARD & HIGH SPEED MACHINING ALONG WITH PARAMETRIC STUDY ON FLANK FACE SURFACE TEXTURING OF CUTTING TOOL, Date of defense 10-02-2020

Dr. Hrishikesh Dutta, ELECTRICAL-DISCHARGE MACHINING OF CARBON FIBER-REINFORCED POLYMER COMPOSITES, Date of defense 29-07-2021

PhD (Ongoing):

Arunabh Choudhury, Surface texturing on cutting tool to study machining performance, 2019-23

Souradeep Dutta, Study of micro-machining performance in superalloy, 2019-23

B.Tech Projects:

Denespoul Sohshang, Ardondor Jeengaph and Pavan Kumar Gugulothu, Parametric Analysis of Machinability of Semiconducting Material, 2022-23

Kunal Kumar Ray, Adip Kumar Rabha, Himashri Lahary, Adarsh Singh, 3D Printing of a High-Tech Face Mask, 2021-22

Shubham Chang, Vivek Singh Chauhan, Eugynea Shylla and Prem Kumar, Thermal Analysis of Electric Discharge Machining of German Silver Material, 2020-21

Varish Agarwala and Nitesh Kumar, Re-Design and In-house Fabrication of Forensic tools, 2019-20

Saras Vibhuti, Mandela Rabha and Mashun Vashum, Design of artificial prosthetic hand / fingers with 3D printer, 2018-19

Aiboklang Sawkmie, Shilpi Das and Jaydeep Joshi , Machining of Non-conducting Materials using Wire Electrical Discharge Machining and Numerical Modelling of Performance Parameters, 2016-17

Nikhil Tripathi and Lekhansh Hirwani , Hard Machining: Data Acquisition and Analysis, 2016-17

Student Extra Project:

Mentor: Dr. D.K. Sarma, Team Captain: Varish Agarwala, PRATHAM- Project Go-Cart. Sponsored by TEQIP-III, 2019-20

Head of Department (HoD), Department of Mechanical Engineering, from 05-09-2013 to 05-09-2016.

Invited Member, Senate, NITMeghalaya, from 2013 to 30-06-2020.

Center-in-Charge, Centralized Counseling for M.Tech./M.Arch./M.Plan Admissions (CCMT), For the year 2016.

Associate Dean (P&D), Planning & Development, NIT Meghalaya, from 16-08-2016 to 30-06-18.

Dean (P&D), Planning & Development, NIT Meghalaya, from 01-07-2018 to 30-06-2020.

Registrar (i/c), Administration, NIT Meghalaya, from 26-10-2016 to 18-05-2017.

Head of Center (HoC),Design Innovation Center, from 28-02-18 to till date.

Nodal Officer (Procurement), TEQIP-III, Procurement of equipment, software, minor works etc.,  from 01-04-2017 to 30-09-2021.

Special Invited Member, Building & Works Committee (B&WC), from 30-06-2016 to 30-06-2018.

Member, Building & Works Committee (B&WC),  from 01-07-2018 to 30-06-2020.

Coordinator, Research group, Manufacturing Engineering, ME Deptt. , from 23-06-2020 to till date

Chairman, Library Committee, from 01-07-2020 to 30-06-2023

Chairman, Core Committee for screening of applications for various NF posts of TA, TE and LA, 2020-21

Dean (P&D), Planning & Development, NIT Meghalaya, from 28-08-2023 to till date

Project

Consultancy

Conference

Workshop

Seminar

Workshop

Conference