harishdas@nitm.ac.in
8327766708, 8280046776
https://nitmeghalaya.irins.org/profile/101606
International Journal of Acoustic and Vibration
Books:
Book Chapters:
2021
1. Dynamic Instability of Cantilever Pipe Conveying Fluid. Current Advances in Mechanical Engineering. Page – 149-157.
2. Nonlinear Dynamics of Axially Accelerating String. Current Advances in Mechanical Engineering. Page – 589-598.
2020
1. Simulation of Emission from Coal-Fired Power Plant. Advances in Mechanical Engineering. Page - 975-986.
2. Numerical Analysis of Heat Transfer and Fluid Flow in Mini-channel Heat Sink with Interconnecting Channels. Advances in Mechanical Engineering. Page – 987-1000.
3. Identification of Maximum Stressed Region in Hip Prosthesis. Advances in Mechanical Engineering. Page – 1013-1019.
4. Transverse Vibrations of an Axially Travelling String. Advances in Mechanical Engineering. Page – 127-137.
5. Bed Hydrodynamics of Fluidized-Bed Paddy Drying: An Experimental Study. Advances in Mechanical Engineering. Page – 941-948.
6. Path Planning of a Humanoid Robot Using Rule-Based Technique. Advances in Mechanical Engineering. Page – 1547-1554.
1. Member- Senate of National Institute of Technology, Arunachal Pradesh
2. Assessor - National Assessment and Accreditation Council (NAAC)
3. Member - District Crisis Group, District Magistrate Office, Khordha.
4. Member - District Crisis Group, District Magistrate Office, Puri.
5. Member, Advisory Committee, Nilachal Polytechnic, Bhubaneswar.
6. Member, Advisory Committee, Dhabaleswar Institute of Polytechnic, Dhenkanal.
Academic & Administrative Experience
Professor, National Institute of Technology, Meghalaya w.e.f 27 th Dec’17 to till date.
Member, Senate National Institute of Technology, Meghalaya w.e.f 27 th Dec’17 to till date.
Dean (Public Relations, Branding and Ranking), National Institute of Technology, Meghalaya w.e.f September-2023 to till date.
Member, Senate National Institute of Technology, Arunachal Pradesh w.e.f February 2020 to till date.
Assessor, NAAC and NBA since 2019.
Academic Council Member, BPUT-Odisha since July-2023.
Dean (Planning and Development), National Institute of Technology, Meghalaya w.e.f July-2023 to August-2023.
Member, Board of Governors, National Institute of Technology Meghalaya w.e.f October 2021 to October 2023.
Dean (Student’s Welfare), National Institute of Technology, Meghalaya w.e.f 1st July 2021 to till date.
Dean (Faculty Welfare), National Institute of Technology, Meghalaya w.e.f 1st July 2019 to 30th June 2021.
Dean Student’s Welfare, Siksha O’ Anusandhan University, Bhubaneswar w.e.f 31st July 2017 till 26th Dec’18.
Chief Warden, all hostels of Institute of Technical Education and Research, Siksha O’ Anusandhan University, Bhubaneswar w.e.f 11th July 2017 to 26th Dec 2017.
Associate Dean, School of Mechanical and Civil Engineering, Institute of Technical Education & Research, Siksha O’ Anusandhan University, Bhubaneswar, Orissa. (July'2011 – July’2017).
Professor & Head, Mechanical Engineering Department, Institute of Technical Education & Research, Siksha O’ Anusandhan University, Bhubaneswar, Orissa (June'2010-June'2011).
Assistant Professor & Head, Mechanical Engineering Department, Institute of Technical Education & Research, Siksha O’ Anusandhan University, Bhubaneswar, Orissa (July'2004-May'2010).
Senior Lecturer, Mechanical Engineering Department, Orissa Engineering College, Biju Pattanaik University of Technology, Bhubaneswar, Orissa (July'1996- June'2004).
Lecturer, Mechanical Engineering Department, Orissa Engineering College, Biju Pattanaik University of Technology, Bhubaneswar, Orissa (December'1990-June'1996).
Convenor of Anti Ragging committee at institute level for the academic session 2014-2015, 2015-2016, 2016-2017.
Chairman of the curriculum and academic regulation committee for Dual Degree Engineering program (DDE), Dual Degree Management program (DDM) and M.Tech (3 years) program for Industry sponsored personnel from the academic session 2014-2015 onwards.
Convenor of the Orientation program for 1st year Graduate and Post-Graduate students in all disciplines from 2010-2011 sessions onwards.
Chairman, Board of Studies, Department of Mechanical Engineering during the tenure of Head of Mechanical Engineering and Associate Dean, School of Mechanical and Civil Engineering.
Member of the academic council of Siksha O’ Anusandhan University, Bhubaneswar w.e.f 2008-2009.
1. Chairman, Industry-Academia Conclave-2019, National Institute of Technology Meghalaya, 12-13 December 2019.
2. Organising Secretary, ICRIDME-2018, National Institute of Technology Meghalaya, 8-10 November-2018.
3. Convenor, 1st International Conference on best practices in supply chain management (BPSCM 2012) at S O A University Bhubaneswar on 22nd & 23rd November 2012.
4. Convenor, Industry-Academia Conclave at S O A University Bhubaneswar on 17th July 2014.
5. Organising Committee Co-Chair, National Conference on Biomechanical Science (NCBMS 2014) at S O A University Bhubaneswar on 7th & 8th March 2014.
Research & Development Project:
S.No |
Year |
Project Title |
Sponsoring Agency |
Project Cost INR |
PI/Co-PI |
Status |
1 |
2018 (18.09.2018) |
Industrial and mining environment surveillance and monitoring of structures and material handling using neural-fuzzy AI embedded sensor-based hybrid land-aerial mobile robot. |
M/s Jindal Steel & Power Ltd.
|
16, 22,400/- |
PI |
Continuing |
2 |
2018 (09.06.2018) |
Surveillance and monitoring of industrial equipment, industrial erections and buildings using hybrid ground mobile aerial robot with the help of AI techniques, image processing and sensors inputs. |
Hindalco Industries Limited (UNIT - Aditya Aluminium) |
9,00,000/- |
Co-PI |
Continuing |
Consultancy Projects:
S. No |
Year |
Project Title |
Industry Name |
Project Cost INR |
Status |
1. |
2022 |
Random Verification of Annual
Inventory on Hazardous waste management |
Central Pollution Control Board Govt of India |
2.4 Lakhs |
Completed |
2. |
2021 |
Technical vetting and modification
of boiler for Unit-1 & 4 at Vedanta Ltd. Jharsuguda |
Power Mech Projects Limited |
2.36 Lakhs |
Completed |
3. |
2019 |
Vetting of the design for
erection and launching scheme of 48m bowstring girder for construction of
Road over bridge in lieu between Bayana-Mathura section |
Kamalakanta Engineering & Construction Company
Pvt. Ltd. |
1.65 Lakhs |
Completed |
4. |
19.09.
18 |
Technical
study of firing and combustion of the blended coal in pulverized coal fired
subcritical boilers (135 MW and 600 MW) and identification of ill effects (if
any) through three dimensional CAD modelling and computational fluid dynamics
simulation |
M/S Vedanta
Limited, Aluminium
& Power |
20
Lakhs |
Completed |
5. |
29.10.
18 |
Technical
study for combustion of coal and Pet coke fired circulating fluidized bed combustion
boiler
|
ACC Limited
& Ambuja Cement Limited |
05
Lakhs |
Completed |
6. |
01.12.
18 |
I. Submission of a report on the cause of
failure of Bunker. II. Vetting
of structural design of the Coal Bunker |
M/S.EMAMI
Paper Mills. |
03
Lakhs |
Completed |
7. |
14.12.
18 |
Technical Study and Vetting of Combustion of Blast Furnace Gas and
Coal in a Bubbling Fluidized Bed Combustion Boiler through Three Dimensional
CAD Modeling and Computational Fluid Dynamics Simulation |
Jindal Steel & Power Limited
|
12
Lakhs |
continuing |
8. |
09.12.15 |
Testing
of stability of Ammonia stacks (two nos) at M/s Paradeep Phosphate Limited,
Paradeep, Odisha |
M/s
Paradeep Phosphate Limited, Paradeep, Odisha |
6,90,000 |
Completed
(20.04.16) |
9. |
07.08.15 |
Hazard
analysis, Rapid safety audit & offset emergency plan of Khurda District,
Odisha |
District
Crisis Group, Govt of Odisha |
Pilot
Project |
Completed
(03.06.16) |
10. |
11.04.15 |
Stability
testing of twelve nos of self supported steel chimney at TRL Krosaki
Refractories Limited |
Trl
Krosaki Refractories Limited, Jharsuguda, Odisha |
6,25,000 |
Completed
(30.06.15) |
11. |
30.10.14 |
Design and Drawing of safety guard of J18C1 |
Jindal
Steel and Power Limited, Angul |
1,00,000 |
Completed
(30.11.14) |
12. |
29.10.14 |
Technical
partner for auxiliary energy audit at Jindal Steel and Power Limited, Angul |
National
Productivity Council, India |
50,000 |
Completed |
13. |
30.04.14 |
Technical
partner for investment of grade energy audit at Utkal university and
Revenshaw University, Odisha |
National
Productivity Council, India |
10,000 |
Completed |
14. |
18.01.14 |
Preparation
of Onsite emergency plan , SOP & SMP, dispersion modelling and Safety
& Health policy for Jindal India Thermal Power Limted, Odisha |
Jindal
India Thermal Power Limted, Odisha |
3,45,000 |
Completed
(20.03.14) |
Guidance To Doctoral Students:
S.No |
Name of the Student |
Regd No. |
Title |
Status |
1 |
Amiya Kumar Dash |
508ME811 |
Multiple damage identification of beam structure using vibration analysis and artificial intelligence techniques |
Completed (2012) |
2 |
Dhirendra Nath Thatoi |
1061018006 |
Fault diagnosis of dynamic structures using adaptive intelligent techniques |
Completed (2015) |
3 |
Sankar Narayan Das |
1161018008 |
Date palm leaf – thermoplastic composite : an experimental study |
Completed (2015) |
4 |
Ajay Kumar Behera |
1271018001 |
Adoption of information technology and its effect on quality and performance in service industries |
Completed (2016) |
5 |
Jajneswar Nanda |
1161018007 |
Intelligent condition monitoring of dynamic structures |
Completed (2017) |
6 |
Pragyan Parimita Patnaik |
1271018004 |
Study on Various Emission Reduction Techniques And Its Effect on The Performance of Diesel Engine |
Completed (2017) |
7 |
Asita Kumar Rath |
1581001047 |
GAIT Analysis and Path Planning of Humanoid Robots using Artificial Intelligence Technique |
completed (2018) |
8 |
Venkata Naga Lakshmi Durga |
1371018001 |
Design, development and performance analysis of natural convection hybrid dryer |
Continuing |
9 |
Mr. Binayak Pattanayak |
1481001026 |
Design, development and performance analysis of a fluidized bed dryer |
Completed (2019) |
10 |
Mr. Shakti Prakash Jena
|
1481001030 |
Experimental analysis for air conditioning in automobile cabin using engine waste energy |
Completed (2019) |
11 |
Deepak Kumar Agarwalla
|
1371018005 |
Biomechanical analysis of implants used in human body |
Continuing |
12 |
Haladhar Rout
|
1371018006 |
Automated scale-up study of convective dryer design |
Continuing |
13 |
Saroj Kumar Padhi
|
1161018009
|
Parametric appraisal of FDM built parts under dynamic loading conditions |
Completed (2018) |
14 |
Rabiteja Patra
|
1271018006 |
Failure analysis of prosthesis and implants with different bone configuration |
Thesis Submitted |
15 |
Sanjay Kumar Behera |
1161018004 |
Vibration analysis of cracked composite structure |
Completed (2018) |
16 |
Pruthiviraj Nemalipuri |
P18ME004 |
CFD Simulation of Pool Fire & BLEVE |
Thesis Submitted |
17 |
Manoj Kumar Panda | P19ME004 | CFD Simulation of fired heaters in oil and gas industries | Continuing |
18 |
Vasujeet Singh |
P19ME007 |
CFD Simulation of large scale CFBC boilers |
Continuing |
19 |
Umakant Samantaray |
P19ME013 |
Simulation of large scale Tangentially fired boilers |
Continuing |
20 |
Swaroop Jena |
P19ME014 |
Combustion analysis of large scale CFBC boilers with corrosion effect |
Continuing |
21 |
Ashesh Kumar Padhy |
P22ME013 |
Performance analysis of solar power thermal power plant using nano fluid |
Continuing |
Guidance to Post Graduate Students
Year |
Regd No |
Name of Student |
Project Title |
2022 |
T20ME004 |
M. Venkat Koti |
Numerical analysis of large scale tangentially fired boiler |
2021 |
T19ME001 |
Ajay Pawar |
CFD analysis on fluidization and hydrodynamic study of CFBC boiler |
2021 |
T19ME004 |
Bhargav Saikia |
CFD analysis of LNG Jet fire |
2020 |
T18ME003 |
Muddada Srinivasarao |
CFD analysis of industrial single pool fires |
2020 |
T18ME017 |
Ankur Kumar |
CFD analysis of industrial Jet fires |
2019 |
T17ME005 |
Vasujeet Singh |
Cooling of Electronic equipments. |
2019 |
T17ME006 |
Praveen Kumar Sharma |
Thermal and Hydraulic Performance Analysis of Finned Tube Heat Exchanger with Various Configuration. |
2018 |
1391094001 |
Caberi Sinha |
Optimization of design and numerical simulation of a corrugated designed tube recuperative Air Preheater (APH). |
2018 |
1391085022 |
Varun Kumar |
CFD Analysis of finned tube Economizer. |
2017 |
1561026004 |
Pruthiviraj Nemalipuri |
Prediction and Assessment of air pollutants emitted from Combined Heat and Power plant (CHP) using numerical simulation. |
2017 |
1561026004 |
Subhrajyoti Behura |
Thermal modelling of gasketed Plate Heat exchanger for a Beverage Industry. |
2016 |
1461026009 |
Vivekananda Giri |
Optimization of performance of porous surface burner based on length of mixing tube for cooking application. |
2016 |
1461026002 |
Mohammad Ayub Ansari |
Performance analysis of water block for high end CPU cooling. |
2015 |
1361026010 |
Asita Kumar Rath |
CFD analysis of the articular cartilage with synovial fluid at knee joint. |
2015 |
1361026006 |
Sanjaya Kumar Mishra |
Designing, modelling and experimental analysis of cascade refrigeration system for low temperature application for preservation of human blood plasma in blood banks. |
2015 |
1361026002 |
Sunita Panigrahi |
Performance analysis of triple concentric helical pipe heat exchanger using nano fluid. |
2015 |
1361026005 |
Kartik Kumar Khuntia |
CFD analysis of carotid bifurcation characterizing the hemodynamic parameters. |
2014 |
1261026002 |
Sadananda Pattnayak |
Effective design of shell and tube heat exchanger using MATLAB. |
2014 |
1261026007 |
Monalisa Sahoo |
Experimental and numerical studies of a triple concentric helical pipe heat exchanger. |
2013 |
1161026001 |
Krushna Chandra Sahoo |
Theoretical design and experimental analysis of vapour compression refrigeration system incorporating suction line heat exchanger combined with adiabatic capillary tube and using R600a |
2013 |
1161026008 |
Upasana Kanungo |
Computational study of blood rheology in carotid bifurcation characterizing the hemodynamic parameters. |
2013 |
1161026003 |
Pravupada Senapaty |
CFD analysis of the synovial fluid. |
2012 |
1051018005 |
Biswaranjan Champatiray |
Synthesis, Characterization and thermo mechanical analysis of natural fibre polymer composites. |
2012 |
1051018012 |
Abinash Mahapatro |
Experimental simulation of a natural convection grain drying system. |
2012 |
1051018015 |
Chandra sekhar Mishra |
Measurement of thermal conductivity of an epoxy based glass fibre, bamboo fibre, reinforced composite and also its tensile and flexural strength. |
2011 |
0951018001 |
Badal Kumar Dutta |
Optimization of induction length and flow rates of acetylene in Diesel engine. |
2010 |
0851018001 |
Gitanjali Sethi |
Natural convection in semi trapezoidal enclosure. |
2009 |
0751018007 |
Monoja Kumar Sahu |
Enthalpy- porosity technique for phase change of a pure metal under fluctuating boundary conditions. |
2009 |
0751018006 |
Tapano Kumar Hotta |
Finite Volume Method for transient radiation heat transfer and participating medium. |
2009 |
0751018013 |
Nabin Chandra Sahu |
Transport phenomena of chemical etching of semi conductor devices. |
2009 |
0751018010 |
Sunil Kumar Bisoi |
Optimization o9f injection pressure of a direct injection diesel engine using Karanja oil (preheated and blended) as fuel. |
2008 |
0607212028 |
Anukampa Chau Pattnaik |
Air quality impact prediction & assessment of thermal power plant. |
2008 |
0607212029 |
Madhulagna Patnaik |
Cooling Analysis of Electronics Chips by Computational method. |
2006 |
0407212016 |
Dhirendra Nath Thatoi |
Two Phase (Condensation) Heat Transfer Analysis for Polar Profile Tubes by Numerical Method in Steam Condenser |
2006 |
0407212015 |
Bishnu Charan Patra |
Investigation of Heat Flow Rate Through a Multi Fin Array by Finite Difference Method |
Guidance to Graduate Students
Year |
Name of Student |
Project Title |
2017 |
Nihar Das, Anshuman Nayak, Ashutosh Rath, Jayadeep Pattnaik |
Conveyor Belt With Variable Height. |
2017 |
Amit Rathore, Md Aqueel Ansari, Faizan Ahmed, Md Tayab Alli |
Solar Desalination. |
2015 |
Prasun Kundu, Girija Prasanna Tripathy, Danish Habib, Md Wasim Akram, Harpreet Singh, Gaurish Kumar Sahu |
Bio-Mechanical Analysis Of HIP Prosthesis At Different Cut Positions In Total HIP Replacement. |
2015 |
Kishore Chandra Dash, Abhishek Mishra, Rohan Kumar Satapathy Abhinash Patnaik, Peeyush Padhi, Soumya Prakash Dutta |
Designing, Modelling & Experimental Analysis Of Cascade Refrigeration System For Very Low Temperature Application (Evaporator Temperature 233K) For Preservation Of Human Blood Plasma In Blood Banks. |
2015 |
Samiksha Moharana, Sritam Siddhanta Padhy, Rashmi Ranjan Samantaray, Ruchika Pradhan, Soumya Ranjan Mohapatra, Aswini Das, Satyabrata Nayak |
Performance Analysis of Triple Concentric Tube Heat Exchanger Using Nano Fluid. |
2015 |
Homagni Sanyal, Nanda Siddhartha Girijakant, Vivek Singh, Saibhisek Padhy, Sampad Tripathy |
Designing, Modelling & Experimental Analysis Of Cascade Refrigeration System For Very Low Temperature Application (Evaporator Temperature 233K) For Preservation Of Human Blood Plasma In Blood Banks. |
2014 |
Debananda Sahoo, Arun Kumar Roul, Dipti Prasad Senapati, Chinmaya Kumar Swain, Saumya Ranjan Behera |
Affect Of Vibration On Implant Used For Fracture Fixation Of Bone. |
2014 |
Debasish Dash, Debashis Mohanty Jatin Kumar, Swapnesha Samal, Pranay Kar |
Mechanical Advantages Of Curvilinearity Of Bones. |
2014 |
Debyendu Mondal, Janmenjay Dandsena, Rahul Kumar Saini, Dilip Das, Sidharth |
Study Of The Biomechanical Performance Of Implants Used For Fixation Of Fractured Trochanter. |
2014 |
Chandan kumar Biswal, Sabyasachi Mohapatra, Swaroop Kumar Barik, Ashish Nayak |
Design And Development Of A Shunting Locomotive. |
2014 |
Susmita Mohanty, Nishant Mahadev Patil, Sanket Mahaptra, Sachin Kanchan, Soumendra Mandal |
Effect of Vibration on Implant. |
2014 |
Sweta Satapathy, Pushpa Sahoo, Surabhi Ankita Nayak |
Stress distribution and deformation of Tooth and dental Implant under compressive loading – A 3D Finite Element Analysis. |
2014 |
Priyanka Patnaik, Ipsita Mohanty Shilpashree Lenka, Sambhavana Mohanty, Manisha Panda |
Computational analysis of mechanical behaviour of Implant due to Vibration. |
2013 |
Biswajit Mishra, Suvendu Kumar Giri, Mahesh Kumar Panda, Balaram Maharana, Sattwik Ghosh |
A literature review on HIP Prosthesis. |
2013 |
Ajay Kumar Mallick, Shahbaz Khan, Praveen Kumar, Sanjeev Ranjan, Sandeep Kumar Gupta, Nilay Kumar Jaiswal |
Measurement of Clamping and Compression force of different types of screw used in Bone Fixation. |
2013 |
Sanhamitra Debta, Nisha Kumari, Swapnarani Mohapatra, Jhasketan Singh |
Stress Analysis of a HIP Prosthesis. |
2013 |
Bhaskar Kumar, Ashish Kumar Gupta, S. Sai Krishna Dora, Rahul Kumar, Kumar Gaurav, Vikash Kumar |
Force Analysis Of Different Types Of Foot. |
2013 |
Bindusagar, Swaraj Kumar Swain, Amiya Ranjan Panigrahi, Praveen Choudhary, Chandan Kumar Sahu |
Study of stress profile on NAIL in Femur bone. |
2012 |
Tuhina Rai, Shubhra Sinha, Monalisha Maharana, G. Rajesh Nirmalya Mishra, Sunil Behera, Prem Prakash Singh, Saurabh Suman, Sritama Sinha, Abhishek Das, Abhishek Dutta |
An Apparatus For Determining The Viscosity Of Water As A Function Of Temperature. |
Authors |
Title |
Publication |
Year |
Sahoo, Shashendra
Kumar; Panda, Lokanath; Das, Harish Chandra; |
Chaotic Oscillations
in Axially Travelling String with Time Varying Velocity |
Recent Advances in
Mechanical Engineering |
2023 |
Sahoo, Shashendra
Kumar; Panda, Lokanath; Das, Harish Chandra; |
Nonlinear Dynamics of
Translating String with Geometric Nonlinearity |
Recent Advances in
Mechanical Engineering |
2023 |
Dash, Pradipta Kumar;
Mishra, Sanjaya Kumar; Jena, Shakti Prakash; Das, Harish Chandra; |
Energy and Exergy
Study of a Compression Ignition Engine Running with Producer Gas |
Recent Advances in
Mechanical Engineering |
2023 |
Singh, Vasujeet;
Nemalipuri, Pruthiviraj; Vitankar, Vivek; Das, Harish Chandra; Prdhan, Malay
Kumar; Jena, Swaroop; |
Numerical Study on
Hydrodynamics Analysis of Geldart B Group of Particles in a 2D Fluidized Bed
Drier |
Recent Advances in
Mechanical Engineering |
2023 |
Kumar, Ankur;
Nemalipuri, Pruthiviraj; Singh, Vasujeet; Vitankar, Vivek; Das, Harish
Chandra; Pradhan, Malay Kumar; Panda, Manoj Kumar; |
Simulation of Natural
Gas Combustor Using CFD |
Recent Advances in
Mechanical Engineering |
2023 |
Singh, Vasujeet;
Nemalipuri, Pruthiviraj; Das, Harish Chandra; Vitankar, Vivek; Pradhan, Malay
Kumar; Rath, Asita Kumar; Jena, Swaroop; |
Thermo-Hydraulic
Performance of High Heat Flux Electronic Chip Cooling Through Microchannel
Heat Sinks with Fins on Base Plate |
Energy Storage Systems |
2023 |
Dash, Pradipta Kumar;
Jena, Shakti Prakash; Das, Harish Chandra; |
Analysis of Combustion
and Performance Characteristics of a Producer Gas-Biodiesel Operated Dual
Fuel Engine |
Energy Storage Systems |
2023 |
Patel, Umakanta; Ray,
Rashmi; Mohapatra, Abhipreet; Das, Sankar Narayan; Das, Harish Chandra; |
Effect of different
chemical treatments on surface morphology, thermal and tensile strength of
bauhinia vahlii (BV) stem fibers |
Journal of Natural
Fibers |
2022 |
Ray,
Rashmi; Das, Sankar Narayan; Das, Harish Chandra; Das, Asutosh; |
Mechanical, thermal
and microstructural studies of Bauhinia Vahlii fiber reinforced polypropylene
composite |
Polymer Composites |
2022 |
Behera,
Ajay Kumar; Mohapatra, Sasmita; Mahapatra, Rabindra; Das, Harish; |
Effect of Big Data
Analytics in Reverse Supply Chain: An Indian Context |
International Journal
of Information Systems and Supply Chain Management (IJISSCM) |
2022 |
Dash, Pradipta Kumar;
Jena, Shakti Prakash; Das, Harish Chandra; |
Thermodynamic study in
a diesel engine using karanja biodiesel-diethyl ether-producer gas |
International Journal
of Advanced Technology and Engineering Exploration |
2022 |
Patra, Rabiteja; Jena,
Shreeshan; Das, Harish Chandra; Rath, Asita Kumar; |
Finite element
analysis of femoral prosthesis under transient loading for multiple
activities of daily living |
Biomedical
Engineering: Applications, Basis and Communications |
2022 |
Dash, Pradipta K; Das,
Harish C; Jena, Shakti P; |
Investigation on
combustion parameters of a producer gas-biodiesel-diethyl ether operated dual
fuel engine |
Materials Today:
Proceedings |
2022 |
Patra,
Rabiteja; Das, Harish Chandra; Jena, Shreeshan; |
Evaluation of the
mechanical behaviour of a bipolar hip prosthesis under transient loading |
International Journal
of Biomedical Engineering and Technology |
2022 |
Dash, Pradipta Kumar;
Jena, Shakti Prakash; Das, Harish Chandra; |
Combustion and
Performance Analysis of a Dual-fuel Diesel Engine Using Producer Gas |
Research Square |
2021 |
Sahoo,
Shashendra Kumar; Das, HC; Panda, LN; |
An Overview of
Transverse Vibration of Axially Travelling String |
Recent Trends in
Applied Mathematics |
2021 |
Kumar Sahoo,
Shashendra; Panda, Loknath; Chandra Das, Harish; |
Dynamic Instability of
Cantilever Pipe Conveying Fluid |
Current Advances in
Mechanical Engineering |
2021 |
Mohapatra,
Sasmita; Behera, Ajay Kumar; Mahapatra, Rabindra Narayan; Das, Harish
Chandra; Pradhan, Malay Kumar; |
A deterministic
inventory model of aluminium refreshment cans in reverse supply chain |
International Journal
of Services and Operations Management |
2021 |
Sahoo, Shashendra
Kumar; Panda, Loknath; Das, Harish Chandra; |
Nonlinear Dynamics of
Axially Accelerating String |
Current Advances in
Mechanical Engineering |
2021 |
Adhikari,
Biranchi; Behera, Ajay; Mahapatra, Rabindra; Das, Harish; |
Cell phone related
violations and motorcycle accidents: a Bayesian approach |
Operational research
in engineering sciences: theory and applications |
2021 |
Pattanayak, Saroja
Ranjan; Venkaiah, Paladugu; Sarkar, Bikash Kumar; Pattanayak, Bikash; Das,
Harish Chandra; |
Modelling and control
of parabolic trough field system for feed water heating application |
Proceedings of the
26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer
Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu,
India |
2021 |
Muni, Manoj Kumar;
Kumar, Priyadarshi Biplab; Parhi, Dayal R; Rath, Asita Kumar; Das, Harish
Chandra; Chhotray, Animesh; Pandey, Krishna Kant; Salony, Kitty; |
Path planning of a
humanoid robot using rule-based technique |
Advances in mechanical
engineering |
2020 |
Pattanayak, Binayak;
Mohapatra, Siba Shankar; Das, Harish Chandra; |
Bed Hydrodynamics of
Fluidized Bed Paddy Drying: An Experimental Study |
Advances in Mechanical
Engineering |
2020 |
Sahoo,
Shashendra Kumar; Das, HC; Panda, LN; |
Transverse Vibrations
of an Axially Travelling String |
Recent Trends in Wave
Mechanics and Vibrations |
2020 |
Patra,
R; Das, Harish Chandra; Sahoo, J; Ali, Sk; |
Identification of
Maximum Stressed Region in Hip Prosthesis |
Advances in Mechanical
Engineering |
2020 |
Singh, Vasujeet; Das,
Harish Chandra; Nemalipuri, Pruthiviraj; |
Numerical analysis of
heat transfer and fluid flow in mini-channel heat sink with interconnecting
channels |
Advances in Mechanical
Engineering |
2020 |
Nemalipuri,
Pruthiviraj; Das, Harish Chandra; Pradhan, Malay Kumar; |
Simulation of Emission
from Coal-Fired Power Plant |
Advances in Mechanical
Engineering |
2020 |
Rath, Asita Kumar;
Parhi, Dayal R; Das, Harish Chandra; Kumar, Priyadarshi Biplab; Mahto,
Manjeet Kumar; |
Design of a hybrid
controller using genetic algorithm and neural network for path planning of a
humanoid robot |
International Journal
of Intelligent Unmanned Systems |
2020 |
Ray,
Rashmi; Das, Sankar N; Mohapatra, Abhipreet; Das, Harish C; |
Comprehensive
characterization of a novel natural Bauhinia vahlii stem fiber |
Polymer Composites |
2020 |
Mishra, Bibhu Prasad;
Biswal, Bibhuti Bhusan; Behera, Ajay Kumar; Das, Harish Chandra; |
Effect of big data
analytics on improvement of corporate social/green performance |
Journal of Modelling
in Management |
2020 |
Rath, Asita Kumar;
Parhi, Dayal R; Das, Harish Chandra; Kumar, Priyadarshi Biplab; Muni, Manoj
Kumar; Salony, Kitty; |
Path optimization for
navigation of a humanoid robot using hybridized fuzzy-genetic algorithm |
International journal
of intelligent unmanned systems |
2019 |
Mohapatra,
Sasmita; Behera, Ajay Kumar; Mahapatra, Rabindra; Das, Harish; |
A deterministic
inventory model in reverse supply chain |
Journal of Modelling
in Management |
2019 |
Behera,
Sanjay Kumar; Parhi, Dayal R; Das, Harish C; |
Approach to establish
a hybrid intelligent model for crack diagnosis in a fix-hinge beam structure |
International Journal
of Structural Integrity |
2019 |
Pattanayak, Binayak;
Mohapatra, Siba Shankar; Das, Harish Chandra; |
Mathematical modelling
for low temperature batch drying of paddy using fluidised bed technology |
International Journal
of Mathematical Modelling and Numerical Optimisation |
2019 |
Pattanayak, Binayak;
Mohapatra, Siba Shankar; Das, Harish Chandra; |
Energy and exergy
analyses of paddy drying process in a vertical fluidised bed dryer |
International Journal
of Exergy |
2019 |
Pattanayak, Binayak;
Mohapatra, Siba Shankar; Das, Harish Chandra; |
Drying kinetics and
moisture diffusivity analysis of paddy in fluidised bed drying process |
International Journal
of Postharvest Technology and Innovation |
2019 |
Jena, Shakti P;
Acharya, Saroj K; Das, Harish C; Patnaik, Pragyan P; Bajpai, Shubhra; |
Investigation of the
effect of FeCl3 on combustion and emission of diesel engine with thermal
barrier coating |
Sustainable
Environment Research |
2018 |
Rath,
Asita Kumar; Das, Harish Chandra; Parhi, Dayal R; Priyadarshi, Biplab Kumar; |
Application of
artificial neural network for control and navigation of humanoid robot |
Journal of Mechanical
Engineering and Sciences |
2018 |
Rath,
Asita Kumar; Parhi, Dayal R; Das, Harish Chandra; Muni, Manoj Kumar; Kumar,
Priyadarshi Biplab; |
Analysis and use of
fuzzy intelligent technique for navigation of humanoid robot in obstacle
prone zone |
Defence technology |
2018 |
Padhi,
Saroj Kumar; Mahapatra, SS; Padhi, Rosalin; Das, Harish Chandra; |
Performance analysis
of a thick copper-electroplated FDM ABS plastic rapid tool EDM electrode |
Advances in
Manufacturing |
2018 |
Pruthiviraj
Nemalipuri, Dr. Malaya Kumar Pradhan, Prof. (Dr) Harish Chandra Das Dr.
Rabindra Narayan Mahapatra, Barsha Das; |
Prediction of Air
Pollutants Emitting from Chimney of A CHP Using CFD |
International Journal
of Scientific & Engineering Research |
2018 |
Patnaik, Pragyan P;
Jena, Shakti P; Acharya, Saroj K; Das, Harish C; |
Effect of FeCl3 and
diethyl ether as additives on compression ignition engine emissions |
Sustainable
Environment Research |
2017 |
Padhi,
Saroj Kumar; Mahapatra, SS; Das, Harish Chandra; Patro, Brundaban; |
Thick copper
electroplated fdm abs plastic edm electrode: a rapid tool approach |
Journal of
Manufacturing Technology Research |
2017 |
Padhi,
Saroj Kumar; Mahapatra, SS; Das, Harish Chandra; |
Performance of a
copper electroplated plastic electrical discharge machining electrode
compared to a copper electrode |
Int. J. Pure Appl.
Math |
2017 |
Sahoo,
M; Behera, VM; Das, SN; Das, HC; |
Experimental
investigation and performance analysis of triple concentric helical tube heat
exchanger |
International Journal
of Engineering and Technology (IJET), ISSN (Print) |
2016 |
Agarwalla, DK; Dash,
AK; Das, HC; Tripathy, PM; |
Application of
fuzzy-neuro based hybrid technique for damage detection of fixed-fixed beam |
Multi-disciplinary
sustainable engineering: current and future trends |
2016 |
Lakshmi,
DVN; Mohapatra, SS; Das, HC; |
An Experimental Study
on Natural Convection Biomass Dryer with Different Sensible Heat Storage
Materials |
Applied Mechanics and
Materials |
2016 |
Nanda,
Jajneswar; Das, LD; Das, Sandeep; Das, Harish Chandra; |
Influence of
multi-transverse crack on cantilever shaft |
International Journal
of Damage Mechanics |
2015 |
Pattanayak, Binayak;
Shankar Mohapatra, Siba; Patel, Umakanta; Das, Harish Chandra; |
Investigation of
Engineering Properties of Paddy Grown in the Coastal Climate of Eastern India |
Applied Mechanics and
Materials |
2015 |
Lakshmi, DVN;
Mohapatra, SS; Satheesh, Anbalgan; Das, Harish; |
Design and Development
of V-grooved natural convection solar air heater for Odisha |
Applied Mechanics and
Materials |
2015 |
Kumar
Behera, Ajay; Nayak, Narayan Chandra; Das, Harish Chandra; Mohapatra,
Rabindra Narayan; |
An empirical study of
the impact of IT on performance in Indian service industries |
Global Business and
Organizational Excellence |
2015 |
Thatoi, Dhirendranath;
Guru, Punyaslok; Jena, Prabir Kumar; Choudhury, Sasanka; Das, Harish Chandra; |
Comparison of CFBP,
FFBP, and RBF networks in the field of crack detection |
Modelling and
Simulation in Engineering |
2014 |
Mohanty,
Jyoti R; Das, Sankar N; Das, Harish C; Mahanta, Tapan K; Ghadei, Sataya B; |
Solid particle erosion
of date palm leaf fiber reinforced polyvinyl alcohol composites |
Advances in Tribology |
2014 |
Mohanty, JR; Das, HC;
Mohanty, AC; |
A comparative study of
fatigue life prediction of 7020 Al-alloy under load ratio effect |
NISCAIR-CSIR, India |
2014 |
Mohanty,
Jyoti R; Das, Sankar N; Das, Harish C; |
Effect of fiber
content on abrasive wear behavior of date palm leaf reinforced polyvinyl
pyrrolidone composite |
International
Scholarly Research Notices |
2014 |
Mohanty,
Jyoti R; Das, Sankar N; Das, Harish C; |
Tribological behavior
of acrylic acid–modified date palm leaf–reinforced polyvinyl alcohol
composite |
Tribology Transactions |
2014 |
Thatoi, DN; Choudhury,
S; Jena, PK; Das, HC; Subudhi, AK; |
Identification of
Transverse Crack in Beam like Structure using PSO |
Applied Mechanics and
Materials |
2014 |
Mohanty,
Jyoti R; Das, Sankar N; Das, Harish C; Swain, Sarat K; |
Effect of chemically
modified date palm leaf fiber on mechanical, thermal and rheological
properties of polyvinylpyrrolidone |
Fibers and Polymers |
2014 |
Dash, AK; Agarwalla,
DK; Das, HC; Pradhan, MK; Bhuyan, SK; |
Application of Genetic
Algorithm for Fault Detection in Cracked Composite Structure |
Gas Turbine India
Conference |
2014 |
Nanda,
Jajneswar; Das, Harish Chandra; |
Fault diagnosis of
steel cantilever beam with double crack using GA |
European Journal of
Scientific Research |
2013 |
Mohanty,
Jyoti R; Das, Sankar N; Das, Harish C; Swain, Sarat K; |
Effective mechanical
properties of polyvinylalcohol biocomposites with reinforcement of date palm
leaf fibers |
Polymer composites |
2013 |
Behera, Ajay Kumar;
Das, Harish C; Nayak, Narayan C; |
Total Service Quality
Measurement in Technical Education System-A Case Study of Deemed University |
International Journal
of Computer Applications |
2013 |
Parhi, DR; Dash, AK;
Das, HC; |
Formulation of a
genetic algorithm based methodology for multiple crack detection in a beam
structure |
Australian Journal of
Structural Engineering |
2011 |